The Effect of Thermal History on the Fast Crystallization of Poly(l-Lactide) with Soluble-Type Nucleators and Shear Flow

نویسندگان

  • Tianfeng Shen
  • Piming Ma
  • Qingqing Yu
  • Weifu Dong
  • Mingqing Chen
  • Frank Wiesbrock
چکیده

The N1,N1-(ethane-1,2-diyl)bis(N2-phenyloxalamide) (OXA) is a soluble-type nucleator with a dissolving temperature of 230 ◦C in poly(L-lactic acid) (PLLA) matrix. The effect of thermal history and shear flow on the crystallization behavior of the PLLA/OXA samples was investigated by rheometry, polarized optical microscopy (POM), differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD), and scanning electron microscopy (SEM). The crystallization process of the PLLA/OXA-240 sample (i.e., pre-melted at 240 ◦C) was significantly promoted by applying a shear flow, e.g., the onset crystallization time (tonset) of the PLLA at 155 ◦C was reduced from 1600 to 200 s after shearing at 0.4 rad/s for even as short as 1.0 s, while the crystallinity (Xc) was increased to 40%. Moreover, the tonset of the PLLA/OXA-240 sample is 60%–80% lower than that of the PLLA/OXA-200 sample (i.e., pre-melted at 200 ◦C) with a total shear angle of 2 rad, indicating a much higher crystallization rate of the PLLA/OXA-240 sample. A better organization and uniformity of OXA fibrils can be obtained due to a complete pre-dissolution in the PLLA matrix followed by shear and oscillation treatments. The well dispersed OXA fibrils and flow-induced chain orientation are mainly responsible for the fast crystallization of the PLLA/OXA-240 samples. In addition, the shear flow created some disordered α′-form crystals in the PLLA/OXA samples regardless of the thermal history (200 or 240 ◦C).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synthesis and Thermal Properties of Novel Biodegradable ABCBA Pentablock Copolymers from Poly (Ethylene glycol), L-Lactide and p-Dioxanone

In this work, new biodegradable ABCBA type pentablock copolymers with different mole ratio of L-lactide and PPDO-b-PEG-b-PPDO triblock copolymer were synthesized and characterized. In the first step, PPDO-b-PEG-b-PPDO triblock copolymer was synthesized via a ring-opening polymerization of P-DiOxanone (PDO) monomer with Poly (Ethylene Glycol) (P...

متن کامل

Preparation of a reservoir type levonorgestrel delivery system using high molecular weight poly L-lactide

Implantable contraceptive is likely to be a promising new option for fertility control, as we have entered the twenty-first century and the world’s population grows by one billion people in a single decade. The main objective of this study was to develop a subdermal implant for levonorgestrol (a synthetic progestin from 19-norandrostanes) using a high molecular weight biodegradable polymer , i....

متن کامل

Preparation of a reservoir type levonorgestrel delivery system using high molecular weight poly L-lactide

Implantable contraceptive is likely to be a promising new option for fertility control, as we have entered the twenty-first century and the world’s population grows by one billion people in a single decade. The main objective of this study was to develop a subdermal implant for levonorgestrol (a synthetic progestin from 19-norandrostanes) using a high molecular weight biodegradable polymer , i....

متن کامل

Thermal properties and morphology changes in degradation process of poly(L-lactide-co-glycolide) matrices with risperidone.

Determining thermal properties and morphology seems to be useful in the analysis of release and degradation processes form polymeric materials. Risperidone is available in the formulation of a long-acting injection based on poly(D,L-lactide-co-glycolide). Currently, alternative solutions are also offered, i.e., nano- and microparticles or implants, including copolymers of lactide and glycolide....

متن کامل

Preparation and Characterization of Estradiol Valerate Microspheres Using Biodegradable Polymers

     In this study, microspheres containing estradiol valerate were prepared by solvent evaporation method using poly (glycolide-co-lactide) (PLGA 50:50) and poly (lactide). The effect of different process variables such as polymer type, drugpolymer ratio, stirring rate, volume of internal phase and temperature of external phase on the morphology, particle size distribution, encapsulation effic...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016