Microstructure and Hardness of Scandium Trialuminide with Ternary Rare-Earth Additions

نویسندگان

  • Yoshihisa Harada
  • David C. Dunand
چکیده

The microstructure of ternary Al3(Sc1-yREy) intermetallic compounds (where RE is one of the rare-earth elements La, Ce, Nd, Sm, Eu, Yb or Lu), was investigated as a function of RE concentration for 0<y≤0.75. Alloys with La, Ce, Nd, Sm or Eu additions consist of a L12 phase containing a dendritic second phase with D019 (La, Ce, Nd, Sm) or C11b (Eu) structure. Alloys with Yb or Lu additions show a single L12 phase. The RE solubility limits at 1373 K in the L12-Al3(Sc1-yREy) phase are very low for La, Nd, Ce and Eu (0.08-0.41 at.% or y=0.0032-0.0164), low for Sm (3.22 at.% or y=0.1288) and complete for Yb and Lu. The lattice parameter of the L12 solid-solution increases linearly with RE concentration and the magnitude of this effect is correlated with the atomic size mismatch between Sc and the RE elements. The Vickers micro-hardness of the L12 solid-solution increases linearly with increasing RE concentration.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Microstructure of Al3Sc with ternary transition-metal additions

The microstructure of binary Al3Sc and ternary Al3(Sc1−yXy), where X is one of the transition metals from Group IIIA (Y), IVA (Ti, Zr or Hf) or VA (V, Nb or Ta), was investigated as a function of alloying element concentration for 0.1 y 0.75. Alloys with Group IIIA and IVA additions exhibited a single L12 solid-solution phase with some Kirkendall porosity. At the highest concentration studied, ...

متن کامل

THERMAL ANALYSIS AND KINETICS OF THE PRECIPITATION IN WROUGHT Al-Mg, Al-Mg-ScAND Al-Mg-Sc-Me (Me=Zr, Ti) ALLOYS

Precipitation behaviour of wrought Al-6Mg alloys with ternary scandium and quaternary zirconium and titanium has been studied. Hardness measurements and resistivity studies are employed to assess the precipitation behaviour of scandium doped Al-6Mg alloy without or with quaternary additions of zirconium and titanium. Further, the kinetics of precipitations are studied by differential scanning c...

متن کامل

Mechanical Properties and Microstructure of Al – Sc with Rare - Earth Element or Al 2 O 3 Additions

Mechanical Properties and Microstructure of Al–Sc with Rare-Earth Element or Al2O3 Additions Richard Albert Karnesky, Jr. Aluminum alloys strengthened with coherent (L12), nanosize Al3Sc precipitates are structural materials that have outstanding strength at ambient and elevated temperatures. They are creep resistant at 300 ◦C and exhibit a threshold stress, below which creep is not measurable....

متن کامل

Microstructure of Al3Sc with ternary rare-earth additions

The microstructure of ternary L12-Al3(Sc1 yREy) intermetallics, where RE is one of the rare-earth elements selected from five light (La, Ce, Nd, Sm or Eu) or two heavy lanthanoids (Yb or Lu), was investigated as a function of RE concentration for 0.02 y 0.75. Alloys with light RE show two phases: L12-Al3(Sc,RE) and D019-Al3(RE,Sc) (or C11b-Al4(Eu,Sc)). Alloys with heavy RE exhibit a single L12A...

متن کامل

EFFECT OF SCANDIUM ON THE GRAIN REFINING AND AGEING BEHAVIOUR OFCASTAl-Si-MgALLOY

Microstructure and properties of the Al-6Si-0.3Mg alloys containing scandium (0.2 to 0.6wt %) were investigated. The microstructure was observed by optical microscopy, the hardness was determined by Vickers tester and phase transformation was investigated by differential scanning calorimetry (DSC) technique. The results showed that scandium can refine dendrites, enhance hardness in the aged all...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006