Biomechanical analysis of wheelchair propulsion for various seating positions.

نویسندگان

  • L C Mâsse
  • M Lamontagne
  • M D O'Riain
چکیده

The pattern of propulsion was investigated for five male paraplegics in six seating positions. The positions consisted of a combination of three horizontal rear-wheel positions at two seating heights on a single-purpose-built racing wheelchair. To simulate wheelchair propulsion in the laboratory, the wheelchair was mounted on high rotational inertia rollers. For three trials at each seating position, the subjects propelled the designed wheelchair at 60 percent of their maximal speed, which was determined at the beginning of the test session. At each trial, the propulsion technique of the subject was filmed at 50 Hz with a high-speed camera for one cycle, and the raw electromyographic (EMG) signal of the biceps, brachii, triceps brachii, pectoralis major, deltoid anterior, and deltoid posterior muscles were simultaneously recorded for three consecutive cycles. The digitized film data were used to compute the angular kinematics of the upper body, while the EMG signals were processed to yield the linear envelope (LE EMG) and the integrated EMG (IEMG) of each muscle. The kinematic analysis revealed that the joint motions of the upper limbs were smoother for the Low positions-since they reached extension in a sequence (wrist, shoulder, and elbow), when compared to the High positions. Also, the elbow angular velocity slopes were found to be less abrupt for the Backward-Low position. It was observed that in lowering the seat position, less IEMG was recorded and the degrees of contact were lengthened. Among the seat positions evaluated, the Backward-Low position had the lowest overall IEMG and the Middle-Low position had the lowest pushing frequency. It was found that a change in seat position caused more variation in the IEMG for the triceps brachii, pectoralis major, and deltoid posterior. The trunk angular momentum was not found to be affected by a change in seat position which may be related to the variability among the subject's technique of propulsion or to a posture compensation.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The effect of rear-wheel position on seating ergonomics and mobility efficiency in wheelchair users with spinal cord injuries: a pilot study.

This study analyzed the effect of rear-wheel position on seating comfort and mobility efficiency. Twelve randomly selected paraplegic wheelchair users participated in the study. Wheelchairs were tested in two rear-wheel positions while the users operated the wheelchair on a treadmill and while they worked on a computer. Propulsion efficiency, seating comfort, and propulsion qualities were regis...

متن کامل

Review Paper: Wheelchair Design and Its Influence on Physical Activity and Quality of Life Among Disabled Individuals

Encouraging an active lifestyle is an essential part of successful rehabilitation programs, and the link between physical activity and quality of life (QOL) is well established among patients with mobility disorders. Biomechanical aspects of wheelchair design play an important role in physical activity and social participation of disabled individuals. This review focuses on key biomechanical fe...

متن کامل

Usage of tilt-in-space, recline, and elevation seating functions in natural environment of wheelchair users.

This study examined the usage of powered seating functions, including tilt-in-space, backrest recline, and seat elevation, among a group of wheelchair users during their typical daily activities. Twelve individuals who used a power wheelchair with seating functions participated in the study. They drove their own wheelchair and used the seating functions as needed in their community environment ...

متن کامل

Biomechanics of manual wheelchair propulsion in elderly: system tilt and back recline angles.

OBJECTIVE To investigate the effects of the system tilt and back recline angles on the biomechanics of wheelchair propulsion for a group of older, disabled patients. It was hypothesized that increasing both the system tilt and backrest recline angles would have a positive effect on the biomechanical efficiency of manual wheelchair propulsion. DESIGN Three kinetic variables were estimated duri...

متن کامل

Reliability of biomechanical variables during wheelchair ergometry testing.

Wheelchair ergometer testing is used to characterize wheelchair propulsion mechanics. The reliability of kinematic and kinetic measures has not been investigated for wheelchair ergometer testing. In this study, test-retest reliability of biomechanical measurements on a wheelchair ergometer was determined during a submaximal endurance test. Ten nondisabled subjects (seven male, three female), in...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Journal of rehabilitation research and development

دوره 29 3  شماره 

صفحات  -

تاریخ انتشار 1992