European Organization for Nuclear Research Cern Beams Department
نویسندگان
چکیده
The MedAustron Ion therapy center will be constructed in Wiener Neustadt (Austria) in the vicinity of Vienna. Its accelerator complex consists of four ion sources, a linear accelerator, a synchrotron and a beam delivery system to the three medical treatment rooms and to the research irradiation room. The ion sources shall deliver beams of H3, C and light ions with utmost reliability and stability. This paper describes the features of the ion sources presently planned for the MedAustron facility; such as ion source main parameters, gas injection, temperature control and cooling systems. A dedicated beam diagnostics technique is proposed in order to characterize ECR ions beams; in the first drift region after the ion source, a fraction of the mixed beam is selected via moveable aperture. With standard beam diagnostics, we then aim to produce position-dependant observables such as ion-current density, beam energy distribution and emittance for each charge states to be compared to simulations of ECR e-heating, plasma simulation, beam formation and transport. Presented at the International Conference on Ion Sources, Gatlinburg, Tennessee, United States Of America, 20 25 Sep 2009, Subject, Ion sources key words: ion sources, MedAustron
منابع مشابه
European Organization for Nuclear Research Cern – Accelerators and Technology Sector
We review some accelerator physics topics for circular as well as linear colliders, considering both lepton and hadron beams. Invited Contribution to Review of Accelerator Science & Technology, Vol. 7 (2014), Editors Alexander W. Chao and Weiren Chou, World Scientific Pub., Singapore The research leading to these results has received partial funding from the European Commission under the FP7 Re...
متن کاملEuropean Organization for Nuclear Research Cern - Ps Division Cern/ps 2000-026 (pp) Status of Studies for a Neutrino Factory at Cern
There is a strong interest from the physics community for high-quality, high-intensity neutrino beams as produced by a neutrino factory. With the help of other European laboratories, CERN has started a study on some of the many technological challenges of such a facility. Present ideas concerning the proton driver, as well as the muon accelerator complex, are presented and plans for the future ...
متن کاملAliEn Resource Brokers
Pablo Saiz University of the West of England, Frenchay Campus Coldharbour Lane, Bristol BS16 1QY, U.K. CERN, European Organization for Nuclear Research, 1211 Geneve 23, Switzerland Predrag Buncic CERN, European Organization for Nuclear Research, 1211 Geneve 23, Switzerland Institut für Kernphysik, August-Euler-Strasse 6, 60486 Frankfurt am Main, Germany Andreas J. Peters CERN, European Organiza...
متن کاملEUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH CERN - PS DIVISION CERN/PS 2000–071 (BD) 8 November 2000 TRANSVERSE PROFILE MONITOR USING ION PROBE BEAMS
A profile monitor is described that makes use of a low-intensity and low-energy ion beam to measure the transverse profile of a dense proton beam of small dimensions. Three techniques are considered based on the use of ion beams having a pencil, curtain, or cylindrical shape. The detector is almost non-interceptive for the proton beam and does not introduce disturbances in the machine environme...
متن کاملEuropean Organization for Nuclear Research Cern-sl Division
The parameters which characterize the quality of hadron beams in the different accelerators or storage rings most commonly used or in project are reviewed. Owing to the absence of natural damping mechanism, hadron beams require careful manipulations. Some of those are described, in particular the processes used to inject from one machine into another. Among the phenomena which have to be carefu...
متن کاملEUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH Laboratory for Particle Physics (MTA) CERN-NuFACT Note 035 Response of Solid and Liquid Targets to High Power Proton Beams for Neutrino Factories
The response of solid and liquid targets to rapid heating by the incident proton beam is assessed in a classical way, among other things by solving the wave equation under linear conditions and in cylindrical symmetry. This study provides bench mark values and allows to identify critical issues and limiting factors which can help to guide further investigations with more sophisticated means. CE...
متن کامل