Compact bipolar plate-free direct methanol fuel cell stacks.
نویسندگان
چکیده
Fuel cells with a PtAu/C anode and a Pr-doped Mn(2)O(3)/C cathode were stacked without using a bipolar plate, and their discharge properties were investigated in a methanol aqueous solution bubbled with air. A three-cell stack exhibited a stack voltage of 2330 mV and a power output of 21 mW.
منابع مشابه
Design and Fabrication of a Silicon-based Micro Direct Methanol Fuel Cell Stack
This paper presents a silicon-based micro direct methanol fuel cell (μDMFC) stack with compact stacked structure and a unique shared anode plate. The μDMFC stack consists of two fuel cells in electrically parallel connection, while the fuel transport is arranged in series. Experimental results show that the μDMFC stack generates a power density of 12.71mW/cm, almost twice as much as that of a s...
متن کاملNumerical Modeling of an Innovative Bipolar Plate Design Based on the Leaf Venation Patterns for PEM Fuel Cells
Flow channel design on bipolar plates has a direct effect on Proton Exchange Membrane (PEM) fuel cell performance. It has been found out that the flow field design has a deterministic role on the mass transport and water management, and therefore on the achieved power in PEM Fuel cells. This study concentrates on improvements in the fuel cell performance through optimization of channel dimensio...
متن کاملFinite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell
Distribution of contact pressure between the bipolar plate and gas diffusion layer considerably affect the performance of proton exchange membrane fuel cell. In this regard, an adaptive neuro-fuzzy inference system (ANFIS) is developed to predict the contact pressure distribution on the gas diffusion layer due to dimensional errors of the bipolar plate ribs in a proton exchange membrane fuel ce...
متن کاملInvestigation of the electrical properties and corrosion resistance of TiN coating deposited by reactive sputtering on the titanium bipolar plate, used in polymeric fuel cell
The effect of titanium nitride film on the properties of titanium bipolar plates used in polymeric fuel cell was investigated in this research. TiN coatings was deposited on the Ti-grade 1 substrate by using DC-sputtering method. Pure titanium was used as target and coating deposition was done in argon and nitrogen atmosphere. Different TiN thickness was developed by changing sputtering time. T...
متن کاملFunctionalized and Electrospun Polymeric Materials as High-Performance Membranes for Direct Methanol Fuel Cell: A Review
Proton exchange membranes (PEM) for a direct methanol fuel cell (DMFC) have main drawbacks which are methanol permeability, reduced proton conductivity and the cost of the membrane. This paper reviews different polymeric materials such as fluorinated, non-fluorinated, acid-base complex, and composite membranes for DMFC. Currently, nonfluorinated membranes gain a lot of atte...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 47 18 شماره
صفحات -
تاریخ انتشار 2011