Bandwidth Extension for Transimpedance Amplifiers
نویسنده
چکیده
This chapter aims to introduce optical receivers in general and application of electronic circuits in these receivers then some important parts of these electronic circuits which are the amplifiers are discussed. An attempt has been made in this chapter to provide some useful information about different aspects of the optical communication in our life and the importance of high speed wideband aspects in such systems. Eventually the role of transimpedance amplifiers in a typical optical communication receiver is discussed.
منابع مشابه
Analysis and Design of Wideband CMOS Transimpedance Amplifiers Using Inductive Feedback
complies with the regulations of the university and meets the accepted standards with respect to originality and quality. Optical receivers have an important role in high data rate wireline data communication systems. Nowadays, these receivers have data rates of multi Gb/s. To achieve such high data rate in the design of optical receivers, all the amplifiers in the signal path need to be wideba...
متن کاملMulti-Pole Bandwidth Enhancement Technique for Transimpedance Amplifiers
A new technique for bandwidth enhancement of amplifiers is developed. Adding several passive networks, which can be designed independently, enables the control of transfer function and frequency response behavior. Parasitic capacitances of cascaded gain stages are isolated from each other and absorbed into passive networks. A simplified design procedure, using well-known filter component values...
متن کاملAnalyzing the Effect Adding an Active Feedback Network with an Inductive behavior to a Common-Gate Topology as a Transimpedance Amplifier for Low-Power and Wide-Band Communication Applications
Common Gate (CG) topologies are commonly used as the first stage in Transimpedance Amplifiers (TIA), due to their low input resistance. But, this structure is not solely used as a TIA and comes with other topologies such as differential amplifiers or negative resistances and capacitances. This paper deals with analyzing the effect of adding an active feedback network to a common gate topology...
متن کاملBootstrapping Techniques to Improve the Bandwidth of Transimpedance Amplifiers
Transimpedance amplifiers using voltage feedback operational amplifiers are widely used for current to voltage conversion in applications when a moderatehigh bandwidth and a high sensitivity are required, such as photodiodes, photomultipliers, electron multipliers and capacitive sensors. The conventional circuit presents a virtual earth to the input and at low frequencies, the input capacitance...
متن کاملA 500-MHz and 60-dB Omega CMOS Transimpedance Amplifier Using the New Feedforward Stabilization Technique
This paper describes a method of extending the signal frequency bandwidth while increasing the stability of a CMOS transimpedance amplifier (TIA). The TIA consists of three inverting amplifiers in a series, and a high-pass filter plus a non-inverting amplifier that are connected to the last two inverting amplifiers stated above in parallel. The TIA is fabricated using a 0.35 μm CMOS process and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012