Modeling and Analysis of Spray Pyrolysis Deposited SnO2 Films for Gas Sensors

Metal oxide materials such as tin oxide (SnO2) show powerful gas sensing capabilities. Recently, the deposition of a thin tin oxide film at the backend of a CMOS processing sequence has enabled the manufacture of modern gas sensors. Among several potential deposition methods for SnO2, spray pyrolysis deposition has proven itself to be relatively easy to use and cost effective while providing excellent surface coverage on step structures and etched holes. A model for spray pyrolysis deposition using a pressure atomizer is presented and implemented in a Level Set framework. A simulation of tin oxide deposition is performed on a typical gas sensor geometry and the resulting structure is imported into a finite element tool in order to analyze the electrical characteristics and thermo-mechanical stress present in the grown layer after processing. The deposition is performed at 400 C and the subsequent cooling to room temperatures causes a stress to develop at the material interfaces due to variations in the coefficient of thermal expansion between the different materials. L. Filipovic (&) S. Selberherr Institute for Microelectronics, Technische Universität Wien, Gußhausstraße 27–29/E360, A–1040 Wien, Austria e-mail: [email protected] S. Selberherr e-mail: [email protected] G. C. Mutinati E. Brunet S. Steinhauer A. Köck Molecular Diagnostics, Health and Environment, AIT GmbH, Donau-City-Straße 1, A–1220 Wien, Austria e-mail: [email protected] E. Brunet e-mail: [email protected] S. Steinhauer e-mail: [email protected] A. Köck e-mail: [email protected] G.-C. Yang et al. (eds.), Transactions on Engineering Technologies, DOI: 10.1007/978-94-017-8832-8_22, Springer Science+Business Media Dordrecht 2014 295