High speed interconnect data dependent jitter analysis

نویسندگان

  • Tian Xia
  • Di Mu
چکیده

This paper focuses on modeling and characterizing the data dependent jitter (DDJ) in high-speed interconnect. The analysis process is performed based on the Fourier series using the interconnect RLC model. By calculating the pattern dependent delay deviations, the DDJ is characterized. To validate the model accuracy, the analysis results have been compared against Cadence simulations. The interconnect layout optimization is also explored to minimize the DDJ. & 2010 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design Advances in PCB/Backplane Interconnects for the Propagation of High Speed Gb/s Digital Signals

Over the past five years tremendous advances have been made in the design of copper-based transmission line interconnects capable of propagating high-speed broadband digital signals over long lengths of printed circuit boards (PCBs) and backplanes. Data rates of 5 Gb/s transmitted over a single differential pair routed across more than one meter of PCB and backplane interconnect using low-cost ...

متن کامل

Dual Phase Detector Based Delay Locked Loop for High Speed Applications

In this paper a new architecture for delay locked loops will be presented.  One of problems in phase-frequency detectors (PFD) is static phase offset or reset path delay. The proposed structure decreases the jitter resulted from PFD by switching two PFDs. In this new architecture, a conventional PFD is used before locking of DLL to decrease the amount of phase difference between input and outpu...

متن کامل

Receiver Jitter Tracking Characteristics in High-Speed Source Synchronous Links

High-speed links which employ source synchronous clocking architectures have the ability to track correlated jitter between clock and data channels up to high frequencies. However, system timing margins are degraded by channel skew between clock and data signals and high-frequency loss. This paper describes how these key channel effects impact the jitter performance and influence the clocking a...

متن کامل

Reducing data dependent jitter utilising adaptive FIR pre-emphasis in 0.18 μm CMOS

Due to advances of technology in multimedia applications in recent years, the demand for high user end bandwidth point to point links has increased significantly. Jitter requirements have become ever more stringent with the increase in high speed serial link data rates. The introduced jitter severely degrades the performance of the high speed serial link. This paper introduces an adaptive FIR p...

متن کامل

High-speed Synchronisation for Optical Packet Networks

Optical regeneration, high-speed synchronisation, OTDM packet network, timing jitter, clock recovery Key Results: Results show serious limitations in the minimum level of jitter tolerable by high-speed regeneration. For 40Gbit/s OTDM (Optical Time Division Multiplexing) transmission the tolerable level of jitter to maintain error-free transmission, is 1.5ps for synchronous regeneration and 1ps ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Microelectronics Journal

دوره 41  شماره 

صفحات  -

تاریخ انتشار 2010