Properties of PEMA-NH4CF3SO3 Added to BMATSFI Ionic Liquid
نویسندگان
چکیده
Polymer electrolyte films, comprising ammonium trifluoromethanesulfonate salt and butyl-trimethyl ammonium bis(trifluoromethylsulfonyl)imide ionic liquid immobilized in poly (ethyl methacrylate) was studied. Structural, morphological, thermal and electrical properties of the polymer electrolyte films were investigated by differential scanning calorimetry, scanning electron microscopy, and impedance spectroscopy, respectively. Interactions of the salt and ionic liquid with the host polymer were investigated by Fourier transform infra-red spectroscopy. Electrochemical stability of the electrolytes was determined using linear sweep voltammetry and transference numbers corresponding to ionic transport has been evaluated by means of the Wagner polarization technique. The highest conductivity achieved is in the order of 10 S cm for the film added with 35 wt % butyl trimethylammonium bis (trifluoromethanesulfonyl)imide. The film has high amorphicity and low glass transition temperature of 2 °C. The film is electrochemically stable up to 1.8 V. The ion transference number in the polymer film is 0.82 and the conductivity behavior obeys Vogel-Tamman-Fulcher equation.
منابع مشابه
Physicochemical Properties of a Frolic Ionic Liquid: Ethylammonium Propionate
Ethylammonium Propionate with high polarity and ionic conductivity was synthesized andcharacterized with 1HNMR and IR. This ionic liquid which is prepared from readily available startingmaterial in high yield shows reasonably high at viscosity and heat stability up to 150 °C. This IonicLiquid is able to dissolve most of organic solvents due to the hydrogen interaction between IonicLiquid and th...
متن کاملCured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization
Poly(ethylene-g-maleic anhydride) (PEMA)/graphene nanoplatelets (xGn) (PEMA-xGn) composites were prepared by melt dispersion in an internal shear mixer. By adding dicumyl peroxide (DCP), cured poly(ethylene-g-maleic anhydride) C-PEMA was also produced. Different amounts of xGn were introduced into the PEMA in range of 0.5–5 wt. %. The effects of the sequence of feeding additives into the mixer ...
متن کاملAn Improvement to the Properties of GAP Binder with Energetic Ionic Liquids
Glycidyl azide polymer (GAP) is used as a binder in the propellants. Energetic ionic liquids are used as a plasticizer to correct the properties of polymer. In this study, first ionic liquid was bonded to the GAP by certain amount and then the energetic anions of nitrate (NO3) and azide (N3) were used to exchange anion. FTIR analyses confirm accurately anions exchange. DSC, viscometer and heat ...
متن کاملPartial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid
1-butyl-3-methyl imidazolinium hydroxide ionic liquid (BMIm[OH]) is loaded on commercial low surface area Pd-Ag/α-Al2O3 solid catalyst to enhance higher selectivity of acetylene partial hydrogenation. Different experimental techniques such as atomic absorption spectroscopy, surface area measurement and gas chromatography have been utilized to characterize chemical, structural and catalytic pro...
متن کاملThe Prediction of Thermo Physical, Vibrational Spectroscopy, Chemical Reactivity, Biological Properties of Morpholinium Borate, Phosphate, Chloride and Bromide Ionic Liquid: A DFT Study
In the light of computational chemistry, based on morpholinium cation-based Ionic Liquid, their different types of physical, chemical, and biological properties is highlighted. The physical properties are evaluated through the Density Functional Theory (DFT) of Molecular Mechanics and also examine the chemical and biological properties. The difference between Highest Occupied Molecular Orbital ...
متن کامل