A Thermoacoustic Model for High Aspect Ratio Nanostructures
نویسندگان
چکیده
In this paper, we have developed a new thermoacoustic model for predicting the resonance frequency and quality factors of one-dimensional (1D) nanoresonators. Considering a nanoresonator as a fix-free Bernoulli-Euler cantilever, an analytical model has been developed to show the influence of material and geometrical properties of 1D nanoresonators on their mechanical response without any damping. Diameter and elastic modulus have a direct relationship and length has an inverse relationship on the strain energy and stress at the clamp end of the nanoresonator. A thermoacoustic multiphysics COMSOL model has been elaborated to simulate the frequency response of vibrating 1D nanoresonators in air. The results are an excellent match with experimental data from independently published literature reports, and the results of this model are consistent with the analytical model. Considering the air and thermal damping in the thermoacoustic model, the quality factor of a nanowire has been estimated and the results show that zinc oxide (ZnO) and silver-gallium (Ag2Ga) nanoresonators are potential candidates as nanoresonators, nanoactuators, and for scanning probe microscopy applications.
منابع مشابه
Alternative nanostructures for thermophones.
Thermophones are highly promising for applications such as high-power SONAR arrays, flexible loudspeakers, and noise cancellation devices. So far, freestanding carbon nanotube aerogel sheets provide the most attractive performance as a thermoacoustic heat source. However, the limited accessibility of large-size freestanding carbon nanotube aerogel sheets and other even more exotic materials rec...
متن کاملSYNTHESIS OF HIGH ASPECT RATIO SILVER NANOWIRES: PARAMETRIC STUDY OF THE POLYOL PROCESS
Silver nanowires (AgNWs) are considered as one-dimensional nanostructures, which have received much attention due to their nanoscale size, high aspect ratio, high electrical and thermal conductivity, optical transparency and high mechanical stability. Preparation of AgNWs by polyol process is remarkably sensitive to the interactions between synthesis parameters. In this study, the effect of the...
متن کاملTunable high aspect ratio polymer nanostructures for cell interfaces.
Nanoscale topographies and chemical patterns can be used as synthetic cell interfaces with a range of applications including the study and control of cellular processes. Herein, we describe the fabrication of high aspect ratio nanostructures using electron beam lithography in the epoxy-based polymer SU-8. We show how nanostructure geometry, position and fluorescence properties can be tuned, all...
متن کاملEngineered high aspect ratio vertical nanotubes as a model system for the investigation of catalytic methanol synthesis over Cu/ZnO.
Catalytically synthesized methanol from H2 and CO2 using porous Cu/ZnO aggregates is a promising, carbon neutral, and renewable alternative to replace fossil fuel based transport fuels. However, the absence of surface-engineered model systems to understand and improve the industrial Cu/ZnO catalyst poses a big technological gap in efforts to increase industrial methanol conversion efficiency. I...
متن کاملDirect e-beam writing of high aspect ratio nanostructures in PMMA: A tool for diffractive X-ray optics fabrication
We present a fast and reliable fabrication method of dense, periodic and high aspect ratio PMMA and metallic nanostructures. Biased lines are directly exposed by a 100 keV electron beam in thick layers of polymethyl-methacrylate (PMMA) resist to produce polymer mold which is later used to grow Au high aspect ratio structures by electroplating. Dense PMMA and Au nanostructures with aspect ratios...
متن کامل