Respiratory health of workers exposed to low levels of chromium in stainless steel production.

نویسندگان

  • M Huvinen
  • J Uitti
  • A Zitting
  • P Roto
  • K Virkola
  • P Kuikka
  • P Laippala
  • A Aitio
چکیده

OBJECTIVES To determine whether occupational exposure to chromite, trivalent chromium, or hexavalent chromium causes respiratory diseases, an excess of respiratory symptoms, a decrease in pulmonary function, or signs of pneumoconiosis among workers in an integrated chain of stainless steel production. METHODS This cross sectional study was carried out in 1993 and the inclusion criterion was a minimum of eight years of employment in the same production department. A self administered questionnaire was collected, and spirometry, measurement of diffusing capacity, chest radiography, and laboratory tests were carried out by a mobile research unit. RESULTS There were 221 workers in the exposure groups and 95 in the control group. The average duration of employment was 18 years. No significant differences in the odds ratios (ORs) of the symptoms were found between the exposure and the control groups. In a logistic regression analysis age and smoking significantly explained the occurrence of most of the respiratory symptoms. The smokers in the chromite group had significantly lower forced vital capacity (FVC), forced expiratory volume in one second (FEV1), and diffusing capacity than the corresponding values of the control group. The analysis of variance between study groups, smoking, and exposure time, without modelling for interactions, showed that the chromite group had lower values for FVC, FEV1, and diffusing capacity than the other groups. The occurrence of small opacities was more frequent on the chest radiographs of the workers in the chromite group. CONCLUSIONS An average exposure time of 18 years in ferrochromium and stainless steel production and exposure to dusts containing low concentrations of hexavalent or trivalent chromium do not lead to any respiratory changes detectable by lung function tests or radiography nor to any increase in symptoms of respiratory diseases. The lung function values were lower and the occurrence of radiological findings was more frequent among the workers from the chromite mine than among the controls. The difference was partly caused by differences in age and smoking habits, but evidently also partly by higher exposures more than two decades ago or by the fibrous components of the dust.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mortality study among workers producing ferroalloys and stainless steel in France.

A mortality study was carried out among the workers of a plant that had produced ferrochromium and stainless steel, and was still producing stainless steel, in order to determine whether exposure to chromium compounds, to nickel compounds, and to polycyclic aromatic hydrocarbons (PAH) could result in a risk of lung cancer for the exposed workers. The cohort comprised 2269 men whose vital status...

متن کامل

Dermal exposure to chromium in the grinding of stainless and acid-proof steel.

OBJECTIVES The aim of the study was to measure the dermal exposure levels of chromium dust during grinding of stainless and acid-proof steel parts. METHODS The potential dermal exposure of the body was measured with a patch sampling method and the actual exposure of hands with a hand-wash method. Simultaneously, personal air samples were also collected. RESULTS The range of body and hand ex...

متن کامل

Chronic interstitial nephropathy after plasma cutting in stainless steel.

Chromium is nephrotoxic in experimental animals. In subjects with acute chromium intoxication acute nephritis has been reported and renal function has been affected in chromium exposed workers with a high urinary chromium concentration. Chronic kidney disease after long term occupational exposure to chromium has, however, not been reported previously. A case report is presented concerning a 48 ...

متن کامل

The Evaluation of Corrosion Behavior of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel Dissimilar Welds

In the present study, the corrosion behavior of AISI 347 austenitic stainless steel to ASTM A335 low alloy steel dissimilar joint was investigated. For this purpose, two filler metals, ER309L and ERNiCr-3, were selected to be used during the gas tungsten arc welding process. To investigate the corrosion behavior of the joints after welding, the specimens were tested in 3.5% sodium chloride solu...

متن کامل

Cause-specific mortality in Finnish ferrochromium and stainless steel production workers

BACKGROUND Although stainless steel has been produced for more than a hundred years, exposure-related mortality data for production workers are limited. AIMS To describe cause-specific mortality in Finnish ferrochromium and stainless steel workers. METHODS We studied Finnish stainless steel production chain workers employed between 1967 and 2004, from chromite mining to cold rolling of stai...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Occupational and environmental medicine

دوره 53 11  شماره 

صفحات  -

تاریخ انتشار 1996