Switching Flow-Graph nonlinear modeling technique - Power Electronics, IEEE Transactions on
نویسنده
چکیده
A unified graphical modeling technique, “Switching Flow-Graph” is developed to study the nonlinear dynamic behavior of pulse-width-modulated (PWM) switching converters. Switching converters are variable structure systems with linear subsystems. Each subsystem can be represented by a flow-graph. The Switching Flow-Graph is obtained by combining the flowgraphs of the subsystems through the use of switching branches. The Switching Flow-Graph model is easy to derive, and it provides a visual representation of a switching converter system. Experiments demonstrate that the Switching Flow-Graph model has very good accuracy.
منابع مشابه
Transmission switching cost modeling and determination candidate Lines for participation in joint energy and reserve markets
There is a great resolution calling for smart grids in recent years. Introduction of new technologies, that make the network flexible and controllable, is a main part of smart grid concept and a key factor to its success. Transmission network as a part of system network has drawn less attention. Transmission switching as a transmission service can release us from load shedding and remove the co...
متن کاملAn improved automotive power distribution system using nonlinear resonant switch converters - Power Electronics, IEEE Transactions on
Insertion of a dc-dc converter between the automobile battery and electrical loads is proposed. This would allow gradual conversion to higher battery voltage, regulation of dc distribution voltage, and multiple distribution voltage levels. Switching loss arising from parasitic inductances is a serious problem in this application. The nonlinear resonant switch can remove this source of loss, ach...
متن کاملDynamics of One-Cycle
One-Cycle Control is a nonlinear control method. The Flow-Graph modeling technique is employed to study the large-signal and small-signal dynamic behavior of One-Cycle Controlled switching converters. Systematic desig? method for One-Cycle Control systems is provided with the Cuk converter as an example. Physical insight is given which explains how OneCycle Control achieves instant control with...
متن کاملMODELING OF HIGH-POWER-FACTOR RECTIFIERS BASED ON SWITCHING CONVERTERS WITH NONLINEAR-CARRIER CONTRO - Power Electronics Specialists Conference, 1996. PESC '96 Record., 27th Annual IEEE
The paper presents unified modeling and analysis of high-power-factor rectifiers based on switching converters with nonlinear-carrier control (NLC). In NLC control, which offers simple, high-performance power-factor correction (PFC), the switch duty ratio is obtained by comparing a signal derived from the switch current with a periodic nonlinear carrier. A general expression is derived for the ...
متن کاملDevelopment of an Analytic Model for Flux Switching Motors
This paper presents developing an analytical model for flux switching motors. The motor is a class of variable reluctance motors that has two windings on stator; a field winding and an armature winding. Due to saliency of both stator and rotor poles, accurate modeling is difficult which arises from the nonlinear behavior of the machine. This paper presents a simple model which is able to predic...
متن کامل