Dynamic Behaviour of ISFET - based Sensor - Actuator Systems
نویسنده
چکیده
Rapid acid-base titrations can be performed at the surface of a noble-metal electrode with coulometrically generated ions. An ISFET is used as an indicator electrode to detect the equivalence point in the resulting titration curve. The time needed to reach the equivalence point is typically 0.5 to 10 s for acid/base concentrations ranging from 0.5 x lop3 to 20 x lop3 mol 1 -I. A model is presented describing the concentration profiles which appear during the coulometric generation of ions. The result of this model is in good agreement with corresponding measurements. These measurements are carried out with two different actuator electrodes, of which the processing steps are described.
منابع مشابه
A Simple Approach for Determination of Actuator and Sensor Locations in Smart Structures Subjected To the Dynamic Loads
The present work demonstrates the successful application of a simple active vibration control procedure based on structural dynamics. Based on mathematical and structural dynamics’ theories, the appropriate locations of sensor and actuator locations of the smart structure are predicted. Also, the optimum value of actuator force which controls the structural vibrations as quickly as it is possib...
متن کاملModelling of non-steady-state concentration profiles at ISFET-based coulometric sensor-actuator systems
Acid or base concentrations can be determmed very rapidly by performmg an acid-base titration with coulometncally generated OHor H+ ions at a noble metal actuator electrode m close proximity to the pH-sensitive gate of an ion-sensitive field effect transistor (ISFET) The ISFET is used as the mdicator electrode to detect the eqmvalence point in the titration curve Typical values for the time nee...
متن کاملPreparation of Iridium Oxide and its Application in Sensor-Actuator Systems
Acid or base concentrations can be determined by coulometric titration. A new alliridium oxide sensor-actuator device is presented, of which the titrant is generated by a reversible redox reaction occurring in the electroactive iridium oxide actuator electrode, and the equivalence point in the titration curve is detected by the pH-sensitive iridium oxide sensor. The advantage with respect to th...
متن کاملTungsten trioxide ( WO , ) as an actuator electrode material for ISFET - based coulometric sensor - actuator systems
Acid or base concentrations can be determined by performing an acid-base titration with OHor H+ ions, coulometricaliy generated by the electrolysis of water at a noble metal actuator electrode. This can be done very rapidly if the actuator electrode is in close proximity to an ISFET which is used as the indicator electrode to detect the equivalence point in the titration curve. In order to rest...
متن کاملApplication of Piezoelectric and Functionally Graded Materials in Designing Electrostatically Actuated Micro Switches
In this research, a functionally graded microbeam bonded with piezoelectric layers is analyzed under electric force. Static and dynamic instability due to the electric actuation is studied because of its importance in micro electro mechanical systems, especially in micro switches. In order to prevent pull-in instability, two piezoelectric layers are used as sensor and actuator. A current amplif...
متن کامل