Chemistry and Fundamentals of the Sol–Gel Process
نویسنده
چکیده
منابع مشابه
The role of the DCCAs in the preparation of crack-free Xerogel
Sol–gel chemistry is an efficient tool to control the morphology and reactivity of solids. Drying is the crucial step due to the capillary forces exerted during the classic ambient drying process, which induces the collapse of the wet gel porosity. The use of N, N-dimethylformamide (DMF), a newly found DCCA were found to be effective in the sol–gel synthesis of crack-free silica gel monolith fr...
متن کاملThe role of the DCCAs in the preparation of crack-free Xerogel
Sol–gel chemistry is an efficient tool to control the morphology and reactivity of solids. Drying is the crucial step due to the capillary forces exerted during the classic ambient drying process, which induces the collapse of the wet gel porosity. The use of N, N-dimethylformamide (DMF), a newly found DCCA were found to be effective in the sol–gel synthesis of crack-free silica gel monolith fr...
متن کاملPreparation and Characterization of ZrO2/ZnO Nanocomposite under Ultrasonic Irradiation via Sol-gel Route
Nanocomposite of ZrO2/ZnO was prepared under ultrasonic irradiation by sol gel process from directly mixing Zirconium and Zinc gels, and the mixture was placed under ultrasonic irradiation for 2 hours then aging time the filtrated composite gel was calcinated at 500°C for 3h in furnace. The precursor sol of zirconium was prepared from an aqueous solution of ZrCl4 and zinc acetate dihydrated was...
متن کاملPreparation and Characterization of ZrO2/ZnO Nanocomposite under Ultrasonic Irradiation via Sol-gel Route
Nanocomposite of ZrO2/ZnO was prepared under ultrasonic irradiation by sol gel process from directly mixing Zirconium and Zinc gels, and the mixture was placed under ultrasonic irradiation for 2 hours then aging time the filtrated composite gel was calcinated at 500°C for 3h in furnace. The precursor sol of zirconium was prepared from an aqueous solution of ZrCl4 and zinc acetate dihydrated was...
متن کاملSynthesis and Characterization of Hydrophobic Silica Aerogel by Two Step(Acid-Base) Sol-Gel Process
The silica aerogel was prepared by the acid–base sol–gel polymerization of tetraethylorthosilicate precursor followed by ambient pressure drying. The prepared silica aerogels were characterized by Fourier transform infrared )FT-IR(, Thermo-gravimetric and differential thermal analysis )TG/DTA(, X-ray diffractometer )XRD(, Energy dispersive X-ray microanalysis )EDX(, Brunauer–Emmitt–Teller (BET)...
متن کامل