Simulation and measurement of flow and heat transfer in two planar impinging jets

نویسندگان

  • T. Akiyama
  • K. Yamamoto
  • K. D. Squires
  • K. Hishida
چکیده

The flow and heat transfer in two planar impinging jets are investigated using Large-Eddy simulation and experiments. The jet Reynolds number based on nozzle width and centerline velocity is 500. Predictions are obtained of unforced jets in addition to forced cases in which periodic injection and suction is applied at the nozzle exit of each jet. The goal of the current effort is to characterize the predictions of the flow from the numerical simulations prior to future efforts aimed at applying techniques to control the heat transfer on the impinging wall. Forcing results in significant changes to the flow structure with a rapid development of largescale vortices in the shear layers emerging from the nozzle, which does not occur in the unforced jets. For both the forced and unforced flows, spanwise vorticity is apparent in the structure of the wall jet that forms as the flow develops near and along the impingement surface. The influence of the forcing raises the local Nusselt number in the vicinity of the stagnation line by about 10% compared to the unforced case. 2004 Elsevier Inc. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Heat Transfer under Double Turbulent Pulsating Jets Impinging on a Flat Surface

In this study, the numerical analysis of turbulent flow and heat transfer of double pulsating impinging jets on a flat surface has been investigated. The unsteady two-dimensional numerical solution for two similar and dissimilar jets was performed using the RNG k-ε model. The results showed that the RNG k-ε model has more satisfactory predictions of the Nusselt number distribution. Comparisons ...

متن کامل

Numerical investigation of thermal mixing of shear thinning fluids in one-way opposing jets

In recent years, impinging streams have received increasing interest for their high efficiency in heat and mass transfer. This numerical study was conducted to investigate flow and heat transfer characteristics of one-way opposing jets of non-Newtonian fluids. Effects of Reynolds number impinging angle, momentum ratio and flow behavior index on mixing index were evaluated. The results showed im...

متن کامل

Applying a full implicit finite-difference method in jet impingement heat transfer studies

Jet impingement heat transfer is an effective and practical approach that is employed in many industrial processes where heating, cooling, or drying is required. Details of the heat or mass transfer rate have been investigated both experimentally and numerically and can be found in the published literature. In most of the numerical studies, control-volume approach has been employed to solve the...

متن کامل

Experimental study and numerical simulation of three dimensional two phase impinging jet flow using anisotropic turbulence model

Hydrodynamic of a turbulent impinging jet on a flat plate has been studied experimentally and numerically. Experiments were conducted for the Reynolds number range of 72000 to 102000 and a fixed jet-to-plate dimensionless distance of H/d=3.5. Based on the experimental setup, a multi-phase numerical model was simulated to predict flow properties of impinging jets using two turbulent models. Mesh...

متن کامل

Axi-symmetric Stagnation–Point Flow and Heat Transfer Obliquely Impinging on a Rotating Circular Cylinder

Laminar stagnation flow, axi-symmetrically yet obliquely impinging on a rotating circular cylinder, as well as its heat transfer is formulated as an exact solution of the Navier-Stokes equations. Rotational velocity of the cylinder is time-dependent while the surface transpiration is uniform and steady. The impinging stream is composed of a rotational axial flow superposed onto irrotational rad...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004