“Beating speckles” via electrically-induced vibrations of Au nanorods embedded in sol-gel
نویسندگان
چکیده
Generation of macroscopic phenomena through manipulating nano-scale properties of materials is among the most fundamental goals of nanotechnology research. We demonstrate cooperative "speckle beats" induced through electric-field modulation of gold (Au) nanorods embedded in a transparent sol-gel host. Specifically, we show that placing the Au nanorod/sol-gel matrix in an alternating current (AC) field gives rise to dramatic modulation of incident light scattered from the material. The speckle light patterns take form of "beats", for which the amplitude and frequency are directly correlated with the voltage and frequency, respectively, of the applied AC field. The data indicate that the speckle beats arise from localized vibrations of the gel-embedded Au nanorods, induced through the interactions between the AC field and the electrostatically-charged nanorods. This phenomenon opens the way for new means of investigating nanoparticles in constrained environments. Applications in electro-optical devices, such as optical modulators, movable lenses, and others are also envisaged.
منابع مشابه
Dimethylamine Controlled Sol-Gel Process to Grow ZnO Nanorods
ZnO nanorods were prepared using dimethylamine (DMA) controlled Sol-Gel process. Dimethylamine was added as an additive to control the sol-gel process for growing ZnO nanorods. DMA would exhibit stabilizing effect, promote dissolution of precursor and control the rate of sol-gel reactions because of its basic nature and significant miscibility. The Structural and microstructural properties of t...
متن کاملLayer-by-Layer Self-Assembling Gold Nanorods and Glucose Oxidase onto Carbon Nanotubes Functionalized Sol-Gel Matrix for an Amperometric Glucose Biosensor
A novel amperometric glucose biosensor was fabricated by layer-by-layer self-assembly of gold nanorods (AuNRs) and glucose oxidase (GOD) onto single-walled carbon nanotubes (SWCNTs)-functionalized three-dimensional sol-gel matrix. A thiolated aqueous silica sol containing SWCNTs was first assembled on the surface of a cleaned Au electrode, and then the alternate self-assembly of AuNRs and GOD w...
متن کاملFabrication and nanostructural characterization of TiO2 nanorods
TiO2 nanorods are synthesized by a thermal corrosion. In present work, synthesis of TiO2 nanorods in anatase, rutile and Ti8O15 phases, by using the sol-gel method and alkaline corrosion are reported. The morphologies and crystal structures of TiO2 nanorods are characterized by use of field emission scanning electron microscopy, atomic force microscopy and X-ray diffractometer techniques. The o...
متن کاملSynthesis, electrical properties, and nanocomposites of poly(3,4- ethylenedioxythiophene) nanorods
Cellulose nanofibers or ‘‘whiskers’’ derived from tunicates were coated with PEDOT:PSS to produce high-aspect-ratio nanorods with high electrical conductivity. Films made from these PEDOT:PSS whiskers have surface resistivities as low as 97 U/,. The nanorods were found to disperse well in polar organic solvents such as dimethylformamide, which allowed the fabrication of nanocomposites with iner...
متن کاملGrowth and Electrochemical Properties of Single-Crystalline V2O5 Nanorod Arrays
Growth and electrochemical properties of single-crystalline vanadium pentoxide (V2O5) nanorod arrays were investigated. Vanadium pentoxide nanorod arrays were grown by electrochemical deposition, surface condensation induced by a pH change and sol electrophoretic deposition. Uniformly sized vanadium oxide nanorods with a length of about 10 mm and diameters of 100 or 200 nm were grown over a lar...
متن کامل