Bio-Inspired Flexible Flapping Wings with Elastic Deformation

Over the last decades, there has been great interest in understanding the aerodynamics of flapping flight and development of flapping wing Micro Air Vehicles (FWMAVs). The camber deformation and twisting has been demonstrated quantitatively in a number of insects, but making artificial wings that mimic those features is a challenge. This paper reports the development and characterization of artificial wings that can reproduce camber and twisting deformations. By replacing the elastic material at the wing root vein, the root vein would bend upward and inward generating an angle of attack, camber, and twisting deformations while the wing was flapping due to the aerodynamic forces acting on the wing. The flapping wing apparatus was employed to study the flexible wing kinematics and aerodynamics of real scale insect wings. Multidisciplinary experiments were conducted to provide the natural frequency, the force production, three-dimensional wing kinematics, and the effects of wing flexibility experienced by the flexible wings. The results have shown that the present artificial wing was able to mimic the two important features of insect wings: twisting and camber generation. From the force measurement, it is found that the wing with the uniform deformation showed the higher lift/power generation in the flapping wing system. The present developed artificial wing suggests a new guideline for the bio-inspired wing of the FWMAV.