The Design of Ota-c Filter Based on the Prototype of Ladder Lc Filter
نویسنده
چکیده
The article discusses the design method of operational trans-conductance amplifier-C(OTA-C) filter based on the prototype of LC filter. It gives the OTA circuit used in the filter. And it makes a detailed analysis on characteristics of OTA. A third order OTA-C filter is presented. Its cut-off frequencies can be tuned by the bias DC current of OTA. The filter is easy to integrate. The proposed OTA has been simulated in CMOS technology. Simulation results show that the repose of the OTA-C filter and passive LC filter is almost the same. And it can be used in middle to high frequency circuit.
منابع مشابه
Design of Gate-Driven Quasi Floating Bulk OTA-Based Gm–C Filter for PLL Applications
The advancement in the integrated circuit design has developed the demand for low voltage portable analog devices in the market. This demand has increased the requirement of the low-power RF transceiver. A low-power phase lock loop (PLL) is always desirable to fulfill the need for a low power RF transceiver. This paper deals with the designing of the low power transconductance- capacitance (Gm-...
متن کاملA Sub-µW Tuneable Switched-Capacitor Amplifier-Filter for Neural Recording Using a Class-C Inverter
A two stage sub-µW Inverter-based switched-capacitor amplifier-filter is presented which is capable of amplifying both spikes and local field potentials (LFP) signals. Here we employ a switched capacitor technique for frequency tuning and reducing of 1/f noise of two stages. The reduction of power consumption is very necessary for neural recording devices however, in switched capacitor (SC) cir...
متن کاملOta-c Filters with Finite Zeros and without Floating Capacitors
In this paper we present a novel technique for OTA-C filter realizations with finite zeros based on doubly loaded passive ladder networks. Only grounded capacitors are needed; all floating capacitors are replaced with active simulations eliminating bottom-plate parasitic capacitors and non-observable poles. Bandpass, highpass and bandstop filters are easily obtained from a lowpass OTA-C prototy...
متن کاملDesign and Control of a Novel hybrid Active Power Filter based on Load Harmonic Currents Separation with the aim of DC-link voltage minimization in voltage source converter
This paper proposes a new hybrid active power filter, including voltage source converter (VSC) based active power filter and Thyristor Controllable LC Passive Filter (TCLC-HAPF) for eliminating harmonic load current components and compensating reactive power. This new structure which is based on the separation of high and low-frequency components of load current idea can reduce the drawbacks of...
متن کاملDesign and Implementation of a Kalman Filter-Based Time-Varying Harmonics Analyzer
Nowadays with increasing use of numerous nonlinear loads, voltage and current harmonics in power systems are one of the most important problems power engineers encounter. Many of these nonlinear loads, because of their dynamic natures, inject time-varying harmonics into power system. Common techniques applied for harmonics measurement and assessment such as FFT have significant errors in presen...
متن کامل