A Damage Mechanics Model for Compression Strength of Composites
نویسنده
چکیده
A compression strength model based on damage mechanics and a Gaussian distribution of fiber misalignment is presented. The model uses only three material parameters that can be measured by well established methodologies. The compression strength and all the parameters that enter in the model were measured for the same materials. Predicted values are compared to experimental data for eleven different E-glass reinforced pultruded composites. Theoretical arguments are provided to support the use of damage mechanics and very good correlation is found between theory and experiments. Copyright © 1996 Elsevier Science Ltd.
منابع مشابه
Review of Damage Tolerant Analysis of Laminated Composites
With advanced composites increasing replacing traditional metallic materials, the material inhomogeneity and inherent anisotropy of such materials lead to not only new attributes for aerospace structures, but also introduce new technology to damage tolerant design and analysis. The deleterious effects of changes in material properties and initiation and growth of structural damage must be addre...
متن کاملDetermination of Tensile Strength and Crack Growth of a Typical Polymer Concrete Using Circular Disc Samples
Cracked and un-cracked Brazilian disc specimens subjected to diametral compression were used for conducting fracture toughness and tensile strength experiments on a polymer concrete (PC) material. The value of mode I fracture toughness (KIc) was determined from the center- cracked Brazilian disc and the indirect tensile strength (σt) was obtained from the un-cracked Brazilian disc specimen. The...
متن کاملProgressive Damage Analysis of Laminated Composites using Continuum Damage Mechanics
In this paper, progressive damage and global failure of composite laminates under quasi-static, monotonic loading are investigated using 3D continuum damage mechanics. For this purpose, a finite element program has been developed using an eight-node 2D layered element including layer-wise plate theory. Damage analysis of a single orthotropic layer under various uniform in-plane and transverse l...
متن کاملA Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment
In this article, microstructural characteristics and mechanical properties of Al-Si-Cu/NCP composites were evaluated. Reinforced nanocomposites with 1 wt% nano-clay were fabricated by the method of the stir casting. Stirring times and temperatures were variable parameters to produce specimens. Consequently, the effect of a T6 heat treatment, which contained solutioning at 490 ºC for ...
متن کاملFEM Implementation of the Coupled Elastoplastic/Damage Model: Failure Prediction of Fiber Reinforced Polymers (FRPs) Composites
The coupled damage/plasticity model for meso-level which is ply-level in case of Uni-Directional (UD) Fiber Reinforced Polymers (FRPs) is implemented. The mathematical formulations, particularly the plasticity part, are discussed in a comprehensive manner. The plastic potential is defined in effective stress space and the damage evolution is based on the theory of irreversible thermodynamics. T...
متن کامل