A carbon dioxide stripping model for mammalian cell culture in manufacturing scale bioreactors.

نویسندگان

  • Zizhuo Xing
  • Amanda M Lewis
  • Michael C Borys
  • Zheng Jian Li
چکیده

Control of carbon dioxide within the optimum range is important in mammalian bioprocesses at the manufacturing scale in order to ensure robust cell growth, high protein yields, and consistent quality attributes. The majority of bioprocess development work is done in laboratory bioreactors, in which carbon dioxide levels are more easily controlled. Some challenges in carbon dioxide control can present themselves when cell culture processes are scaled up, because carbon dioxide accumulation is a common feature due to longer gas-residence time of mammalian cell culture in large scale bioreactors. A carbon dioxide stripping model can be used to better understand and optimize parameters that are critical to cell culture processes at the manufacturing scale. The prevailing carbon dioxide stripping models in literature depend on mass transfer coefficients and were applicable to cell culture processes with low cell density or at stationary/cell death phase. However, it was reported that gas bubbles are saturated with carbon dioxide before leaving the culture, which makes carbon dioxide stripping no longer depend on a mass transfer coefficient in the new generation cell culture processes characterized by longer exponential growth phase, higher peak viable cell densities, and higher specific production rate. Here, we present a new carbon dioxide stripping model for manufacturing scale bioreactors, which is independent of carbon dioxide mass transfer coefficient, but takes into account the gas-residence time and gas CO2 saturation time. The model was verified by CHO cell culture processes with different peak viable cell densities (7 to 12 × 106  cells mL-1 ) for two products in 5,000-L and 25,000-L bioreactors. The model was also applied to a next generation cell culture process to optimize cell culture conditions and reduce carbon dioxide levels at manufacturing scale. The model provides a useful tool to understand and better control cell culture carbon dioxide profiles for process development, scale up, and characterization. Biotechnol. Bioeng. 2017;114: 1184-1194. © 2016 Wiley Periodicals, Inc.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Culture scale-up studies as seen from the viewpoint of oxygen supply and dissolved carbon dioxide stripping.

Oxygen supply and dissolved carbon dioxide (dCO(2)) stripping are two of the most important control parameters in cell culture. In this study, we investigated the effect of scale-up on the volumetric gas transfer coefficient with bioreactors of different sizes (working volume: 80 L, 500 L, 2000 L, and 10,000 L; aspect ratio: 1.0-1.6). Sparging air into water increased the volumetric oxygen tran...

متن کامل

Scale-up analysis for a CHO cell culture process in large-scale bioreactors.

Bioprocess scale-up is a fundamental component of process development in the biotechnology industry. When scaling up a mammalian cell culture process, it is important to consider factors such as mixing time, oxygen transfer, and carbon dioxide removal. In this study, cell-free mixing studies were performed in production scale 5,000-L bioreactors to evaluate scale-up issues. Using the current bi...

متن کامل

Sparger and Surface Gas Transfer for Cell Culture Bioreactors

The impact of bioreactor and sparger scale-up on gas transfer properties was investigated using four geometrically similar bioreactors ranging in size from 15-L to 2500-L total volume with the same sintered metal frit (microporous) sparger design. The mass transfer coefficients for both oxygen and carbon dioxide were measured at each scale at various flow rates. Scale did not directly affect ga...

متن کامل

Fabrication and Characterization of Polyetherimide Hollow Fiber Membrane Contactor for Carbon Dioxide Stripping from Monoethanolamine Solution

In this research, process asymmetric polyetherimide hollow fiber membranes using ethanol (0, 2 and 4 wt%) as non-solvent additive in the polymer dope via phase inversion method were fabricated. Aqueous solution of 1-methyl-2-pyrrolidine (NMP) (90%) was applied as a bore fluid to avoid inner skin layer formation and water was used as the external coagulant. The morphology of fabricated membranes...

متن کامل

Rapid high-throughput characterisation, classification and selection of recombinant mammalian cell line phenotypes using intact cell MALDI-ToF mass spectrometry fingerprinting and PLS-DA modelling.

Despite many advances in the generation of high producing recombinant mammalian cell lines over the last few decades, cell line selection and development is often slowed by the inability to predict a cell line's phenotypic characteristics (e.g. growth or recombinant protein productivity) at larger scale (large volume bioreactors) using data from early cell line construction at small culture sca...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Biotechnology and bioengineering

دوره 114 6  شماره 

صفحات  -

تاریخ انتشار 2017