Short-carbon-fiber-reinforced epoxy as a piezoresistive strain sensor

نویسنده

  • Xiaojun Wang
چکیده

Epoxy containing 5.5 vol.% short carbon fibers was found to be piezoresistive strain sensor, such that the magnitude of the reversible fractional increase in electrical resistance per unit strain was 6-23 under tension and 29-31 under compression. These values are much higher than those of previously reporied composite piezoresistive materials. The reversible fractional increase in resistance was positive under tension and negative under compression, but the irreversible fractional increase in resistance was positive under both tension and compression. Both reversible and irreversible fractional increases in resistance increased in magnitude with increasing stresslstrain amplitude. The reversible portion was due to piezoresistivity, while the irreversible Doriion was due to damage.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

MECHANICAL CHARACTERIZATION AND ANALYSIS OF RANDOMLY DISTRIBUTED SHORT BANANA FIBER REINFORCED EPOXY COMPOSITES

Short banana fiber reinforced composites have been prepared in laboratory to determine mechanical properties. It has been observed that as soon as the percentage of the banana fiber increases slightly there is a tremendous increase in ultimate tensile strength, % of strain and young modulus of elasticity. Reinforcement of banana fibers in epoxy resin increases stiffness and decreases damping pr...

متن کامل

Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites

The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...

متن کامل

Experimental and Numerical Investigations on the Mechanical Characteristics of Carbon Fiber Sensors

Carbon fiber-based materials possess excellent mechanical properties and show linear piezoresistive behavior, which make them good candidate materials for strain measurements. They have the potential to be used as sensors for various applications such as damage detection, stress analysis and monitoring of manufacturing processes and quality. In this paper, carbon fiber sensors are prepared to p...

متن کامل

Monitoring Strain in Engineered Cementitious Composites Using Wireless Sensors

The emergence of new structural materials opens exciting venues for improving the strength and durability of civil structures. Engineered Cementitious Composites (ECC) are a special class of fiber reinforced cementitious composite (FRCC) that combine short polymer fibers with a cement matrix to produce a material, which undergoes strain-induced hardening and is ultra-ductile when loaded in tens...

متن کامل

Performance Characterization of VGCF/Epoxy Nanocomposite Sensors under Static Load Cycles and in Static Structural Health Monitoring

(2013) Performance characterization of VGCF/epoxy nanocomposite sensors under static load cycles and in static structural health monitoring. Notice: Changes introduced as a result of publishing processes such as copy-editing and formatting may not be reflected in this document. For a definitive version of this work, please refer to the published source: Abstract Compared to conventional metal-f...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002