Ripples and ripples: from sandy deserts to ion-sputtered surfaces
نویسندگان
چکیده
We study the morphological evolution of surfaces during ion sputtering and we compare their dynamical corrugation with aeolian ripple formation in sandy deserts. We show that, although the two phenomena are physically different, they must obey similar geometrical constraints and therefore they can be described within the same theoretical framework. The present theory distinguishes between atoms that stay bounded in the bulk and others that are mobile on the surface. We describe the excavation mechanisms, the adsorption and the surface mobility by means of a continuous equation derived from the study of dune formation on sand. We explore the spontaneous development of ordered nanostructures and explain the different dynamical behaviours experimentally observed in metals or in semiconductors or in amorphous systems. We also show that this novel approach can describe the occurrence of rotation in the ripple direction and the formation of other kinds of self-organized patterns induced by changes in the sputtering incidence angle. New Journal of Physics 7 (2005) 122 PII: S1367-2630(05)90892-6 1367-2630/05/010122+23$30.00 © IOP Publishing Ltd and Deutsche Physikalische Gesellschaft 2 Institute of Physics DEUTSCHE PHYSIKALISCHE GESELLSCHAFT
منابع مشابه
Surface instabilities in granular matter and ion-sputtered surfaces
We apply a theoretical approach, originally introduced to describe aeolian ripples formation in sandy deserts, to the study of surface instability in ion sputtered surfaces. The two phenomena are distinct by several orders of magnitudes and by several physical mechanisms, but they obey to similar geometrical constraints and therefore they can be described by means of the same approach. This ope...
متن کاملLinear stability and instability patterns in ion-sputtered silicon.
We study the patterns formed on Ar(+) ion-sputtered Si surfaces at room temperature as a function of the control parameters ion energy and incidence angle. We observe the sensitivity of pattern formation to artifacts such as surface contamination and report the procedures we developed to control them. We identify regions in control parameter space where holes, parallel mode ripples and perpendi...
متن کاملCrystallographically-dependent ripple formation on Sn surface irradiated with focused ion beam
The metallographically polished polycrystalline Sn surface was sputtered by 30 kV focused Ga ions at room temperature. The experiment was carried out using various FIB incidence angles (08, 158, 308, and 458) over a wide range of doses (10– 10 ions/cm). The surface morphology was carefully characterized under the optical microscope, scanning electron microscope (SEM) and atomic force microscope...
متن کاملModelling of High-Frequency Roughness Scattering from Various Rough Surfaces through the Small Slope Approximation of First Order
The first-order small slope approximation is applied to model the scattering strength from a rough surface in underwater acoustics to account for seafloor for high frequencies from 10 kHz to hundreds of kilohertz. Emphasis is placed on simulating the response from two-dimensional anisotropic rough surfaces. Several rough surfaces are described based on structure functions such as the particular...
متن کاملMultiple Scattering Causes the Low Energy–Low Angle Constant Wavelength Topographical Instability of Argon Ion Bombarded Silicon surfaces
We show that holes and perpendicular mode ripples that are generated at low argon ion beam energies and incidence angles on room temperature silicon targets (C. S. Madi et al, Phys. Rev. Lett. 101, 246102 (2008) and C. S. Madi et al, J. Phys. Condens. Matter 21, 224010 (2009)) are caused by multiple scattering events from the impingement of the primary ion beam on adjacent silicon shields. We s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005