System Identification, Modelling and Control of an Autonomous Underwater Vehicle
نویسندگان
چکیده
Autonomy of an underwater vehicle is in the main attributable to the design of a suitable guidance and control system. Generally, the control system is developed and tested first in simulation studies using a model of the vessel to gain confidence in the approach being adopted. Therefore, plant identification is imperative to gain insight about the system. This paper is concerned with a practical system identification (SI) method in order to obtain a model of an autonomous underwater vehicle (AUV) using input output data as opposed to painstaking mathematical modelling techniques. A model of the AUV is developed using SI and tested in simulations using a linear quadratic Gaussian (LQG) controller. Modelling and simulation results are presented. Copyright © 2003 IFAC
منابع مشابه
Identification of an Autonomous Underwater Vehicle Dynamic Using Extended Kalman Filter with ARMA Noise Model
In the procedure of designing an underwater vehicle or robot, its maneuverability and controllability must be simulated and tested, before the product is finalized for manufacturing. Since the hydrodynamic forces and moments highly affect the dynamic and maneuverability of the system, they must be estimated with a reasonable accuracy. In this study, hydrodynamic coefficients of an autonomous un...
متن کاملOPTIMIZED FUZZY CONTROL DESIGN OF AN AUTONOMOUS UNDERWATER VEHICLE
In this study, the roll, yaw and depth fuzzy control of an Au- tonomous Underwater Vehicle (AUV) are addressed. Yaw and roll angles are regulated only using their errors and rates, but due to the complexity of depth dynamic channel, additional pitch rate quantity is used to improve the depth loop performance. The discussed AUV has four aps at the rear of the vehicle as actuators. Two rule bases...
متن کاملDesign and Experimental Evaluation of integrated orientation estimation algorithm Autonomous Underwater Vehicle Based on Indirect Complementary Filter
This paper aims is to design an integrated navigation system constituted by low-cost inertial sensors to estimate the orientation of an Autonomous Underwater Vehicle (AUV) during all phases of under water and surface missions. The proposed approach relied on global positioning system, inertial measurement unit (accelerometer & rate gyro), magnetometer and complementary filter technique. Complem...
متن کاملDesign of Robust Finite-Time Nonlinear Controllers for a 6-DOF Autonomous Underwater Vehicle for Path Tracking Objective
In this paper, kinematic and dynamic equations of a 6-DOF (Degrees Of Freedom) autonomous underwater vehicle (6-DOF AUV) are introduced and described completely. By developing the nonsingular terminal sliding mode control method, three separate groups of control inputs are proposed for the autonomous underwater vehicle subjected to uncertainties including parametric uncertainties, unmodeled dyn...
متن کاملکنترل مسیر خودکار میکرو زیردریایی 3 درجه آزادی با الهام از حرکت کوسه‌ماهی
An autonomous underwater vehicle (AUV) with less noise and vortices as well as efficient power consumption, is pursued in this research by inspiration of shark swimming. Design, hydrodynamic analysis, modeling, fabrication, navigation, and control of this novel AUV is the main goal of this research. Detailed explanation of the test and experiment with a brief overview on fabrication are provide...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003