Removal Efficiency of the Heavy Metals Zn(II), Pb(II) and Cd(II) by Saprolegnia delica and Trichoderma viride at Different pH Values and Temperature Degrees
نویسندگان
چکیده
The removal efficiency of the heavy metals Zn, Pb and Cd by the zoosporic fungal species Saprolegnia delica and the terrestrial fungus Trichoderma viride, isolated from polluted water drainages in the Delta of Nile in Egypt, as affected by various ranges of pH values and different temperature degrees,was extensively investigated. The maximum removal efficiency of S. delica for Zn(II) and Cd(II) was obtained at pH 8 and for Pb(II) was at pH 6 whilst the removal efficiency of T. viride was found to be optimum at pH 6 for the three applied heavy metals. Regardless the median lethal doses of the three heavy metals, Zn recorded the highest bioaccumulation potency by S. delica at all pH values except at pH 4, followed by Pb whereas Cd showed the lowest removal potency by the fungal species and vice versa in case of T. viride. The optimum biomass dry weight production by S. delica was found when the fungus was grown in the medium treated with the heavy metal Pb at pH 6, followed by Zn at pH 8 and Cd at pH 8. The optimum biomass dry weight yield by T. viride amended with Zn,Pb and Cd was obtained at pH 6 for the three heavy metals with the maximum value at Zn. The highest yield of biomass dry weight was found when T. viride treated with Cd at all different pH values followed by Pb whilst Zn output was the lowest and this result was reversed in case of S. delica. The maximum removal efficiency and the biomass dry weight production for the three tested heavy metals was obtained at the incubation temperature 20℃ in case of S. delica while it was 25℃ for T. viride. Incubation of T. viride at higher temperatures (30℃ and 35℃) enhanced the removal efficiency of Pb and Cd than low temperatures (15℃ and 20℃) and vice versa in case of Zn removal. At all tested incubation temperatures, the maximum yield of biomass dry weight was attained at Zn treatment by the two tested fungal species. The bioaccumulation potency of S. delica for Zn was higher than that for Pb at all temperature degrees of incubation and Cd bioaccumulation was the lowest whereas T. viride showed the highest removal efficiency for Pb followed by Cd and Zn was the minor of the heavy metals.
منابع مشابه
Biosorption of Lead (II) and Zinc (II) ions by pre-treated biomass of phanerochaete chrysosporium
The biosorption of heavy metals can be an effective process for the removal of such metal ions from aqueous solutions. In this study, the adsorption properties of nonliving biomass of phanerochaete chrysosporium for Pb (II) and Zn (II) were investigated by the use of batch adsorption techniques. The effects of initial metal ion concentration, initial pH, biosorbent concentration, stirring speed...
متن کاملHeavy Metals (Cr (VI), Cd (II) and Pb (II)) Ions Removal by Modified Jute: Characterization and Modeling
Jute modified has been used for adsorption of Cr (VI), Cd (II) and Pb (II) ions over a range ofinitial metal ion concentration. Adsorption process is done in batch mode. Adsorption isotherms ofthe heavy metals on adsorbents prepared were determined and correlated with common isothermequations. It was found that the Freundlich isotherm is better than Langmuir for explaining thebehavior of adsorp...
متن کاملHeavy metals removal from wastewater by using different kinds of magnetite nanoadsorbents: effects of different organic and inorganic coatings on the removal of copper and lead ions
Co-precipitation procedure was applied in order to obtain different kinds of magnetic nanoadsobents for the removal of Pb(II) and Cu(II) toxic metal ions from wastewater samples. Prepared nanoadsorbents were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometer (XRD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). The average sizes of t...
متن کاملIsotherm and Kinetic Studies on Adsorption of Pb, Zn and Cu by Kaolinite
The feasibility of kaolinite used as a low-cost adsorbent for the removal of Pb(II), Zn(II) and Cu(II) from aqueous solutions was investigated. During the removal process, batch technique was used, and the effects of heavy metal concentration and contact time on adsorption efficiency at pH of 4.5, under a constant temperature of 20?1 ?C were studied. The experimental results were analyzed using...
متن کاملExperimental modeling of the adsorption kinetics of Cd (II) and Pb (II) ions by Calix [4] arene surface
The removal of Cd2+ and Pb2+ ions from wastewater using p-tert-butyl-calix[4] arene was investigated in terms of initial pH, initial concentration, adsorbent dosage, contact time and temperature. The maximum adsorption occurred at the pH value of 6. The adsorbent studied exhibits high efficiency for Cd (II)and Pb (II) adsorption and the equilibrium states could be achieved in 10 min. Adsorption...
متن کامل