Layer-by-layer processing and optical properties of core/alloy nanostructures.

نویسندگان

  • Peter N Njoki
  • Wenjie Wu
  • Hui Zhao
  • Lukas Hutter
  • Eric A Schiff
  • Mathew M Maye
چکیده

A novel hydrothermal layer-by-layer processing method for the fabrication of core/alloy nanoparticles with highly tunable surface plasmon resonance is described. For a model system of Au/Au(x)Ag(1-x), the processing temperature, alloy composition, and alloy thickness resulted in unique and tailorable plasmonic signatures. The discrete dipole approximation and selective alloy etching were used to correlate this optical response with the particle morphology and alloy phase ultrastructure.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication Of Cu(In,Ga)Se2 Solar Cells With In2S3 Buffer Layer By Two Stage Process

Cu(In,Ga)Se2 thin films (CIGS) on metallic substrate (titanium, molybdenum, aluminum, stainless steel) were prepared by a two-step selenization of Co-evaporated metallic precursors in Se-containing environment under N2 gas flow. Structural properties of prepared thin film were studied. To characterize the optical quality and intrinsic defect nature low-temperature photoluminescence, were perfor...

متن کامل

Investigating the effect of tool dimension and rotational speed on microstructure of Al-B4C surface composite layer produced by friction stir processing (FSP)

Friction stir processing (FSP) was used for the fabrication of Al-B4C surface composite. Al-Mg-Si alloy was considered as the substrate and B4C particles were incorporated into the substrate by thermo-mechanical effect of FSP. The effect of tool dimensions and different rotational speeds on the microstructure and microhardness of the composite layers was evaluated and the optimum process parame...

متن کامل

Effect Of Zinc Oxide RF Sputtering Pressure on the Structural and Optical Properties of ZnO/PEDOT:PSS Inorganic/Organic Heterojunction

Zinc oxide nanostructures are deposited on glass substrates in the presenceof oxygen reactive gas at room temperature using the radio frequency magnetronsputtering technique. In this research, the effects of zinc oxide sputtering pressure on thenanostructure properties of the deposited layer are investigated. The deposition pressurevaries from 7.5 to 20.5 mTorr. AFM resu...

متن کامل

EFFECT OF ANODIC OXIDATION ON THE CORROSION BEHAVIOR OF NICKEL-TITANIUM SHAPE MEMORY ALLOYS IN SIMULATED BODY FLUIDS (SBF)

The effect of anodic oxidation of a NiTi shape memory alloy in sulfuric acid electrolyte on its surface characteristics was studied. Surface roughness was measured by roughness tester. Surface morphology was studied using optical microscopy (OM) and scanning electron microscopy (SEM). Corrosion behavior was specified by recording Potentiodynamic polarization cur...

متن کامل

Electrosynthesis and optical modeling of ZnO nanostructures

Optical modeling was applied for obtaining absorbance spectra and band gap values for different morphology of ZnO semiconductor. In optical modeling, the relative permittivity scalars of zinc oxide coral like nanorods were calculated using the Bruggeman homogenization formalism. ZnO nano rods (ZONRs) as a nucleus layer were fabricated on the Indium Tin Oxide (ITO) by chronoamperometry (CA) in a...

متن کامل

ذخیره در منابع من

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of the American Chemical Society

دوره 133 14  شماره 

صفحات  -

تاریخ انتشار 2011