Biomechanical loads and subjective stress exposure to lumber graders in sawmill industry.
نویسندگان
چکیده
The aim of this study was to determine biomechanical loads and subjective stresses on lumber graders and associated morbidity in a high risk and repetitive sawmill occupation. The exposures of all 29 male sawmill worker volunteers were recorded. Motion and posture were studied with electrogoniometers, muscle loads were recorded with surface electromyography, and psychophysical stresses were assessed with subjective responses. Fifty-nine percent of the participants reported greater than moderate discomfort in their task-dominant upper extremity. Job performance required an average range of motion of 44°, 21°, and 52° in flexion/extension, radial/ulnar deviations, and pronation/supination respectively. It also required an average of 9% maximum voluntary contraction force and was repeated an average of 34 times/min. This repetitive exertion over an 8-h shift was deemed to be a significant risk factor associated with prevalent upper extremity morbidity.
منابع مشابه
Effects of Awkward Posture on Work-Related Musculoskeletal Disorders (WMSDs) among Sawmill Workers in India
Background: The sawmill or lumber mill industry is mainly known as important small-scale industries in India, where thousands of sawmillers suffered from musculoskeletal pain and other health-related problems. The primary aim of the current study is to find out the subjective assessment of musculoskeletal disorders (MSDs) and occupational related health disorders among sawmill workers in India....
متن کاملMachine Vision Technology the Forest for Products Industry
W hen a tree is felled, a process begins to maximize the value of that wood. The log is taken to a sawmill, where someone decides whether the wood is more valuable as lumber, veneer, or chips. If the log is made into lumber, boards cut from it must be edged and trimmed, a process that requires someone to decide how to trim off defective parts and make the board as valuable as possible. Then som...
متن کاملDevelopment of a 3d Log Sawing Optimization System for Small Sawmills in Central Appalachia, Us
A 3D log sawing optimization system was developed to perform log generation, opening face determination, sawing simulation, and lumber grading using 3Dmodeling techniques. Heuristic and dynamic programming algorithms were used to determine opening face and grade sawing optimization. Positions and shapes of internal log defects were predicted using a model developed by the USDA Forest Service. L...
متن کاملBusiness Process: Automation And Optimization Considerations In Hardwood Lumber Manufacturing
Historically, the hardwood lumber natural resource industry has been portrayed as a relatively low-tech industry. Most hardwood sawmills do not adequately consider the potential benefits of information systems enabled applications and solutions to enhance overall yield and efficiency. However, as computer-based technology is implemented across the entire manufacturing process, advanced optimiza...
متن کاملStatistical Modeling for Process Control in the Sawmill Industry
Softwood logs are processed into green boards through a series of horizontal or vertical sawing operations that reduce lumber thickness. This paper uses physical understanding to model how systematic and random errors in board thickness accumulate during sequential resawing. The error model is validated on board thickness measurements gathered at a northern California sawmill. The analysis • ex...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- International journal of occupational safety and ergonomics : JOSE
دوره 17 1 شماره
صفحات -
تاریخ انتشار 2011