Influence of Reaction Operation Conditions on the Final Properties of High Impact Polystyrene (hips)
نویسندگان
چکیده
The main objective of the present work is to analyze the influence of some important operational reaction parameters (agitation speed, polybutadiene – PB – content and initiator concentration) on the final properties of High Impact Polystyrene (HIPS) produced in bulk. Variable effects are analyzed both qualitatively and quantitatively with the help of a fractional factorial design. Physical, chemical and mechanical properties were evaluated through measurement of the weight-average molecular weight (Mw), polydispersity (PD), volume-average diameter of PB particles (D(4,3)) and impact strength (Izod). It was found that PD and D(4,3) depend strongly on the initiator concentration, rubber concentration and agitation speed; Mw depends on initiator and rubber concentrations; and Izod depends on the rubber concentration, PD and D(4,3) in the analyzed experimental range. As a consequence, it was shown that control of final polymer properties can be easily performed through proper manipulation of the analyzed operational variables.
منابع مشابه
Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach
In the current study the influence of weight percentage of HIPS, weight percentage of CNT and hardener content on damping 1st and damping 2nd properties of epoxy/HIPS/CNT hybrid composite wase valuated. Mixture design methodology was employed to generate mathematical models for predicting damping 1st and damping 2nd behaviors of new mentioned hybrid nanocomposite as function of physical factors...
متن کاملEffect of temperature, heating rate and zeolite-based catalysts on the pyrolysis of high impact polystyrene (HIPS) waste to produce fuel-like products
Pyrolysis of high impact polystyrene (HIPS) waste has been investigated under different process parameters, such as temperature, heating rate and types of zeolitic catalysts to produce valuable liquid products. Liquid, gas and coke as products of pyrolysis and aromatic, naphthene, olefin and paraffin as liquid components were obtained and their molecular weight distributions were studied with c...
متن کاملImpact, thermal and biodegradation properties of high impact polystyrene/corn starch blends processed via melt extrusion
High impact polystyrene (HIPS)/corn starch blends were prepared in presence of glycerol as a plasticizer via melt extrusion process by a twin-screw extruder. The novelty of this work is first, because of the use of pre-gelatinized corn starch as modified one and second, the procedure of making blends by extruder which makes it ease of access and also industrially possible. The blends were then ...
متن کاملPolypropylene /Polystyrene in situ nano reinforced blends fiber: Morphology and properties
Polypropylene / polystyrene blends containing montmorillonite (MMT) were prepared using a twin screw extruder followed by fiber spinning. The melt intercalation of PP and PS alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (MPP). The crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (PP/PS) nan...
متن کاملPolypropylene /Polystyrene in situ nano reinforced blends fiber: Morphology and properties
Polypropylene / polystyrene blends containing montmorillonite (MMT) were prepared using a twin screw extruder followed by fiber spinning. The melt intercalation of PP and PS alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (MPP). The crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (PP/PS) nan...
متن کامل