Design and Analysis of Power Head Axial Servo Loading System
نویسندگان
چکیده
Power head is the main motive mechanism of rotary drilling rig. High axial pressure and high frequency is one of its typical working conditions. Axial loading test is a key point in power head performance tests. Overall design, system theoretical analysis and simulation of power head axial loading system were carried out. The bond graph model and state equations of power head axial servo loading system were built on the basis of bond graph theory. Hydraulic system simulation model was constructed and axial steady-state and dynamic loading simulation was made by use of hydraulic simulation software. The maximum axial steady-state load is up to 450kN and the dynamic frequency is 20Hz, both of which can meet the technical requirements. The simulation validates the feasibility of the scheme about power head axial loading system and it provides theory and practice guidance for perfecting the loading system.
منابع مشابه
Numerical and Experimental Study on Ratcheting Behavior of Steel Cylindrical Shells with/without Cutout Under Cyclic Combined and Axial Loading
Ratcheting behavior of steel 304L cylindrical shell under cyclic combined and axial loading are investigated in this paper, numerically. Cylindrical shells were fixed oblique at angle of 20° and normal with respect to the longitudinal direction of the shell and subjected to force-controlled cycling with non-zero mean force, which causes the accumulation of plastic deformation or ratcheting beha...
متن کاملNumerical and Experimental Study on Ratcheting Behavior of Plates with Circular Cutouts under Cyclic Axial Loading
In this paper, accumulation of plastic deformation of AISI 1045 steel plates with circular cutouts under cyclic axial loading is studied. Loading was applied under force-control conditions. Experimental tests were performed using a Zwick/Roell servo hydraulic machine. Under force-control loading with nonzero mean force, plastic strain was accumulated in continuous cycles called ratcheting. Nume...
متن کاملExperimental investigations on the softening and ratcheting behaviors of steel cylindrical shell under cyclic axial loading
In this research, softening and ratcheting behaviors of Ck20 alloy steel cylindrical shells were studied under displacement-control and force-control cyclic axial loading and the behavior of hysteresis curves of specimens was also investigated. Experimental tests were performed by a servo-hydraulic INSTRON 8802 machine. The mechanical properties of specimens were determined according to ASTM E8...
متن کاملDesign Servo System Type and Positioning of Pole Observer Full Rank a Piezoelectric Servo Valve without Integrator
In this paper, the method of modern control approach for the design of controller and observer is used. Other functions such as neural controllers - or fuzzy sliding mode control can be found in this work and the results are compared. First, a dynamic model of the servo valve is intended for the governing equations in state-space form expression are obtained. Due to the system integrator is exp...
متن کاملOptimal Design of UPFC Output Feed Back Controller for Power System Stability Enhancement by Hybrid PSO and GSA
In this paper, the optimal design of supplementary controller parameters of a unified powerflow controller(UPFC) for damping low-frequency oscillations in a weakly connected systemis investigated. The individual design of the UPFC controller, using hybrid particle swarmoptimization and gravitational search algorithm (PSOGSA)technique under 3 loadingoperating conditions, is discussed. The effect...
متن کامل