Synthesis of dual phase bronze alloys from elemental nanoparticle constituents
نویسنده
چکیده
Dual phase (a þ b) copper–tin alloys were synthesized from elemental nanoparticle precursors following consolidation, annealing and quenching steps. The precursors were derived from the sequential reduction of tin and copper salts in ethanolic solution. The dual phase microstructure exhibits a duplex character with a mixture of Cu-rich and Sn-rich (a þ b) regions. 2004 Published by Elsevier Ltd. on behalf of Acta Materialia Inc.
منابع مشابه
Synthesis of Fe-Al-Ti Based Intermetallics with the Use of Laser Engineered Net Shaping (LENS)
The Laser Engineered Net Shaping (LENS) technique was combined with direct synthesis to fabricate L21-ordered Fe-Al-Ti based intermetallic alloys. It was found that ternary Fe-Al-Ti alloys can be synthesized using the LENS technique from a feedstock composed of a pre-alloyed Fe-Al powder and elemental Ti powder. The obtained average compositions of the ternary alloys after the laser deposition ...
متن کاملSynthesis and Characterization of Graphene Oxide Nanoparticles and investigation of Nanofluid Application in Machining Process
The quality of machined workpieces, particularly precious metals, is the main goal of every machining process. A suitable cutting fluid can substantially affect the machining outcome. The study is novel in that it uses nanofluids in the machining process to mitigate the adverse effects of high temperatures and friction. Graphene oxide (GO) nanoparticles were synthesized using the modified Humme...
متن کاملEFFECT OF COMPOSITION AND MILLING TIME ON THE SYNTHESIS OF NANOSTRUCTURED Ni-Cu ALLOYS BY MECHANICAL ALLOYING METHOD
Ni and Cu elemental powder mixtures containing 25, 50, and 75% at Cu were subjected to mechanical alloying in a planetary ball mill under various milling times. Structural evolution was analyzed by means of X-ray diffraction and scanning electron microscopy. Experimental results indicated that nanostructured solid solution alloy powders having homogeneous distribution of Ni and Cu were formed b...
متن کاملPorous NiTi alloy prepared from elemental powder sintering
An elemental powder sintering (EPS) technique has been developed for the synthesis of porous NiTi alloy, in which Ni and Ti powders are used as the reactants and TiH2 powder is added as a pore-forming agent and active agent. Effects of various experimental parameters (sintering temperature, sintering time, and TiH2 content) on the porosity, pore size and pore distribution as well as phase compo...
متن کاملMechanical and Damping Properties of Silicon Bronze Alloys for Music Applications
An alloy for musical instruments should have high enough strength, hardness, specific elastic properties and low damping capacity. The high tin bronze alloys with composition 20-22 wt.% Sn has good acoustical properties, which is capable of producing long-lasting slowly damping vibrations but there is brittle materials. Cracks and fracture may appear on these materials. The study on mechanical ...
متن کامل