Rail Inspection with Guided Waves
نویسندگان
چکیده
The critical subject of transverse crack detection in a rail head is treated in this paper. Conventional bulk wave ultrasonic techniques often fail because of shelling and other surface imperfections that shield the defects that lie below the shelling. A guided wave inspection technique is introduced here that can send ultrasonic energy along the rail under the shelling with a capability of finding the deleterious transverse crack defects. Dispersion curves are generated via a semi analytical finite element technique along with a hybrid guided wave finite element technique to explore the most suitable modes and frequencies for finding these defects. Sensor design and experimental feasibility experiments are also reported.
منابع مشابه
Assessment of Ultrasonic NDT Methods for High Speed Rail Inspection
This article reviews some new ultrasonic rail inspection methods emerging in recent years. It focuses on the state of the art for guided wave technologies and their potential use for used for rail inspection. It considers ultrasound transduction options including EMATs, air coupled, pulsed laser and wheel probe guided wave methods. It compares performances in terms of frequency ranges, energy d...
متن کاملLong Range Inspection of Rail Using Guided Waves - Field Experience
Ultrasonic techniques have been used for many years for the inspection of rail. These measurements can detect the presence of a wide variety of defects but there are practical difficulties with the technology. While large transverse cracks of the type likely to cause catastrophic failure can be detected, the large, critical defects can be masked by large numbers of small, surface defects along ...
متن کاملGuided Wave Inspection and Monitoring of Railway Track
Cost-effective NDE of the vast length of ageing railway track around the world remains challenge for the community. Since continuously welded railway lines may be thought of as one-dimensional elastic waveguides, they are natural candidates for guided wave ultrasound, which offers the potential to interrogate a large length of rail from a single position. Continuously welded rail is installed i...
متن کاملUltrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source
In this paper, the reflection of ultrasonic guided waves from simple dent in pipes has been investigated using finite element method and the relationship between reflection coefficient of these waves and deformation rate has been determined. Also, the effect of the parameters of wave generation source on the generated wave field has been investigated using normal modes expansion method. At firs...
متن کاملPractical Long Range Guided Wave Inspection - Applications to Pipes and Rail
The inspection of large structures using conventional ultrasonic bulk wave techniques is slow because scanning is required if the whole structure is to be tested. Ultrasonic guided waves potentially provide an attractive solution to this problem because they can be excited at one location on the structure and will propagate many metres. However, guided wave testing is complicated by the presenc...
متن کامل