Constitutive equation of friction based on the subloading-surface concept
نویسندگان
چکیده
The subloading-friction model is capable of describing static friction, the smooth transition from static to kinetic friction and the recovery to static friction after sliding stops or sliding velocity decreases. This causes a negative rate sensitivity (i.e. a decrease in friction resistance with increasing sliding velocity). A generalized subloading-friction model is formulated in this article by incorporating the concept of overstress for viscoplastic sliding velocity into the subloading-friction model to describe not only negative rate sensitivity but also positive rate sensitivity (i.e. an increase in friction resistance with increasing sliding velocity) at a general sliding velocity ranging from quasi-static to impact sliding. The validity of the model is verified by numerical experiments and comparisons with test data obtained from friction tests using a lubricated steel specimen.
منابع مشابه
Deformation Behavior of Shirasu Soil by the Extended Subloading Surface Model
This study is aimed at evaluation of the deformation behavior of Shirasu soil (volcanic sandy soil) for reclamation and embankment construction, using elastoplastic constitutive equation based on the subloading surface model with the rotational hardening. Test results for isotropic consolidation and monotonic/cyclic loading-unloading compression with several lateral stresses under the drained c...
متن کاملGenetic Algorithm-based Optimization Procedures to Find the Constants of Johnson-Cook Constitutive Equation
Johnson-Cook constitutive equation is one of the most famous constitutive equations that have ever been developed to model the hot deformation flow curves of different materials. This equation is a predefined model in the traditional finite element codes to describe the material behavior in applications such as simulating the manufacturing processes. In this work, two different genetic algorith...
متن کاملNumerical Simulation of Separation Bubble on Elliptic Cylinders Using Three-equation k-? Turbulence Model
Occurrence of laminar separation bubbles on solid walls of an elliptic cylinder has been simulated using a recently developed transitional model for boundary layer flows. Computational method is based on the solution of the Reynolds averaged Navier-Stokes (RANS) equations and the eddy-viscosity concept. Transitional model tries to simulate streamwise fluctuations, induced by freestream turbulen...
متن کاملEarthquake Analysis of 3-D Structures on Sliding Foundation Using Yield Equation of the Contact Surface
A solution technique for the dynamic analysis of asymmetric base-isolated buildings, subject to earthquake ground motion, is presented. To develop the formulation, a yield surface as a function of both shear force and torsion moment of the sliding surface with rigid perfectly plastic behavior is constituted. To achieve the objective, the yield stress is defined by the friction coefficient throu...
متن کاملEarthquake Analysis of 3-D Structures on Sliding Foundation Using Yield Equation of the Contact Surface
A solution technique for the dynamic analysis of asymmetric base-isolated buildings, subject to earthquake ground motion, is presented. To develop the formulation, a yield surface as a function of both shear force and torsion moment of the sliding surface with rigid perfectly plastic behavior is constituted. To achieve the objective, the yield stress is defined by the friction coefficient throu...
متن کامل