Enhanced drilling using a dual-pulse Nd:YAG laser
نویسندگان
چکیده
A new method for improving the efficiency of laser drilling has been developed. Two synchronized free-running laser pulses from a tandem-head Nd:YAG laser are capable of drilling through 1/8-in-thick stainless-steel targets at a standoff distance of 1 m without gas-assist. The combination of a high-energy laser pulse for melting with a properly tailored high-intensity laser pulse for liquid expulsion results in the efficient drilling of metal targets. We argue that the improvement in drilling is due to the recoil pressure generated by rapid evaporation of the molten material by the second laser pulse.
منابع مشابه
Nd:YAG-CO(2) double-pulse laser induced breakdown spectroscopy of organic films.
Laser-induced breakdown spectroscopy (LIBS) using double-pulse irradiation with Nd:YAG and CO(2) lasers was applied to the analysis of a polystyrene film on a silicon substrate. An enhanced emission signal, compared to single-pulse LIBS using a Nd:YAG laser, was observed from atomic carbon, as well as enhanced molecular emission from C(2) and CN. This double-pulse technique was further applied ...
متن کاملDrilling of Copper Using a Dual-Pulse Femtosecond Laser
The drilling of copper using a dual-pulse femtosecond laser with wavelength of 800 nm, pulse duration of 120 fs and a variable pulse separation time (0.1–150 ps) is investigated theoretically. A one-dimensional two-temperature model with temperature-dependent material properties is considered, including dynamic optical properties and the thermal-physical properties. Rapid phase change and phase...
متن کاملExperimental Study of a Flash-lamp Pumped Passively Q-Switched Nd:YAG Laser Using Cr4+:YAG Saturable Absorber
This paper deals with the experimental results of a xenon flash-lamp pumped passively Q-switched Nd:YAG laser using Cr4+:YAG saturable absorber. The need of a laser cavity to be integrated into a time-of-flight laser range finder is of great interest as an experimental investigation of several laser resonators. Two types of laser resonator, with different lengths, have been studied: the flat-fl...
متن کامل1.7MW Nd:YAG Laser Pulse Generation by A Passive BDN Q-switch
This paper describes the passive Qswitch, based on polymer and organic dye BDN, of a pulsed Nd:YAG laser. Pulses of 27ns duration and peak power of 1.7MW for initial transmission of Q-switch 18.4% 0 T = have been obtained. We have obtained Q-switching efficiency of 77% for train of pulses of 31 and 76.2% 0 T = at the pump energy of 98J. We have also obtained the dependency of laser pulse charac...
متن کاملParametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approach
Nowadays in highly competitive precision industries, the micromachining of advanced engineering materials is extremely demand as it has extensive application in the fields of automobile, electronic, biomedical and aerospace engineering. The present work addresses the modeling and optimization study on dimensional deviations of square-shaped microgroove in laser micromachining of aluminum oxide ...
متن کامل