Boundary Control by Boundary Observer for Hyper-redundant Robots
نویسندگان
چکیده
Abstract: The control problem of a class of hyper-redundant arms with continuum elements, with boundary measuring and control is discussed. First, the dynamic model of the continuum arm is presented. The measuring systems are based on the film sensors that are placed at the terminal sub-regions of the arm. The observers are proposed in order to reconstruct the full state of the arm. A back-stepping method is used to design a boundary control algorithm. Numerical simulations of the arm motion toward an imposed position are presented. An experimental platform shows the effectiveness of the proposed methods.
منابع مشابه
Boundary Feedback Stabilization of a Nonlinear Flexible Gantry Manipulator Using Disturbance Observer
This paper aims to develop a boundary control solution for a single-link gantry robot manipulator with one axis of rotation. The control procedure is considered with link’s transverse vibrations while system undergoes rigid body nonlinear large rotation and translation. Initially, based on Hamilton principle, governing equations of hybrid motions as a set of partial differential equations...
متن کاملInterval Analysis of Controllable Workspace for Cable Robots
Workspace analysis is one of the most important issues in the robotic parallel manipulator design. However, the unidirectional constraint imposed by cables causes this analysis more challenging in the cabledriven redundant parallel manipulators. Controllable workspace is one of the general workspace in the cabledriven redundant parallel manipulators due to the dependency on geometry parameter...
متن کاملInverse Kinematics Resolution of Redundant Cooperative Manipulators Using Optimal Control Theory
The optimal path planning of cooperative manipulators is studied in the present research. Optimal Control Theory is employed to calculate the optimal path of each joint choosing an appropriate index of the system to be minimized and taking the kinematics equations as the constraints. The formulation has been derived using Pontryagin Minimum Principle and results in a Two Point Boundary Value Pr...
متن کاملInverse Kinematics Resolution of Redundant Cooperative Manipulators Using Optimal Control Theory
The optimal path planning of cooperative manipulators is studied in the present research. Optimal Control Theory is employed to calculate the optimal path of each joint choosing an appropriate index of the system to be minimized and taking the kinematics equations as the constraints. The formulation has been derived using Pontryagin Minimum Principle and results in a Two Point Boundary Value Pr...
متن کاملPath Planning for Mobile and Hyper-Redundant Robots Using Pythagorean Hodograph Curves - Advanced Robotics, 1997. ICAR '97. Proceedings., 8th International Conference on
Pythagorean hodograph curves (PH curves) have a number of advantages over other splines commonly used in planar robot path planning: (i) the integral of curvature is small; (ii) the curve, its length, curvature and total “bending energy” are known in closed-form; (iii) start and end positions and directions are straightforwardly usable as boundary conditions; and (iv) length can be traded off a...
متن کامل