Analysis of Lathe Spindle Using Ansys
نویسنده
چکیده
The machine tool spindle provides the relative motion between the cutting tool and the workpiece which is necessary to perform a material removal operation. In turning, it is the physical link between the machine tool structure and the workpiece, while in processes like milling, drilling or grinding, it links the structure and the cutting tool. This work deals with design and analysis of Lathe Spindle in which the material used for the spindle is alloy steel. The spindle is supported by two bearings separated by different spans. Bearings consist of balls with certain stiffness, which acts as a cushioning effect for the spindle and hence can be considered as a spring in the software (Ansys) for analysis.
منابع مشابه
Optimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System
Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...
متن کاملOptimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System
Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...
متن کاملThe dynamic characteristic analysis of spindle based on ANSYS
The basic concept of dynamic characteristics of spindle is introduced. The first ten order vibration mode and natural frequency of shaft are obtained by modal analysis and harmonic response analysis using software ANSYS. The deformation trend of spindle under resonance state is analysed and the contrast between theory and simulation critical speed is done. The frequency response curve of spindl...
متن کاملCheck Tic-coated Tungsten Carbide Tool Wear in Machining Steel
In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...
متن کاملQuantitative Feedback Theory-based Robust Control for a Spindle of Lathe Machine
This paper presents theoritical and experimental design of a robust control based on quantitative feedback theory (QFT) approach to control deepness variations on cutting process for a spindle of lathe machine. The dynamics of a spindle is uncertain and varying due to deepness variation on cutting process. Practical design steps are explained in which QFT based conditions are assembled to obtai...
متن کامل