Clinical evaluation of a new resilient denture liner in long-term use.

نویسندگان

  • S Ohkawa
  • T Matsukawa
  • T Nagasawa
  • H Tsuru
چکیده

The new resilient denture liner "M" was evaluated for adhesion, color stability, surface texture, tissue response, deterioration and denture base stability, at periods of 1 month, 3 months and about 30 months after denture liner application. At the observation of approximately 30 months, the usage of 17 dentures had been discontinued within 2 years, and 6 dentures continued to be used. It could be considered that the main reasons why 17 dentures were discontinued were poor fitting caused by deterioration, and a decrease in the strength of the denture base caused by the denture liner lining. It was suggested that "M" was appropriate for long-term use (about 2 to 3 years), if patients faithfully practice denture cleaning, and if the strength of denture base is considered.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Technique to Guide and Measure the Reduction of a Processed Mandibular Complete Denture for Resilient Soft Liner

A resilient soft liner (RSL) has been used in processed complete dentures but controlling its thickness has always been a challenge because of uneven reduction of the denture’s intaglio surface. Use of a thermoplastic vacuum-formed template and an endodontic K-file, as guides, for the reduction of a processed mandibular complete denture to receive RSL is described in the present report. A proce...

متن کامل

The influence of silicone remover on the tensile bond strength of resilient denture liner to an acrylic denture base resin

Purpose: The purpose of this study was to determine the influence of silicone remover on tensile bond strength of eight silicone-resilient denture liners to a denture base resin. Durability of bond strength of resilient denture liner to denture base resin was also examined by thermal cycling test. Materials and Methods: Eight commercial silicone resilient denture liners were used. The specimens...

متن کامل

The effect of denture base surface pretreatments on bond strengths of two long term resilient liners

PURPOSE Purpose of this study was to evaluate effect of two surface treatments, sandblasting and monomer treatment, on tensile bond strength between two long term resilient liners and poly (methyl methacrylate) denture base resin. MATERIALS AND METHODS Two resilient liners Super-Soft and Molloplast-B were selected.Sixty acrylic resin (Trevalon) specimens with cross sectional area of 10×10 mm ...

متن کامل

A Technique to Guide and Measure the Reduction of a Processed Mandibular Complete Denture for Resilient Soft Liner

A resilient soft liner (RSL) has been used in processed complete dentures but controlling its thickness has always been a challenge because of uneven reduction of the denture’s intaglio surface. Use of a thermoplastic vacuum-formed template and an endodontic K-file, as guides, for the reduction of a processed mandibular complete denture to receive RSL is described in the present report. A proce...

متن کامل

Investigation of bonding properties of denture bases to silicone-based soft denture liner immersed in isobutyl methacrylate and 2-hydroxyethyl methacrylate

PURPOSE The purpose of this study was to investigate the bonding properties of denture bases to silicone-based soft denture liners immersed in isobutyl methacrylate (iBMA) and 2-hydroxyethyl methacrylate (HEMA) for various lengths of time. MATERIALS AND METHODS Polymethyl methacrylate (PMMA) test specimens were fabricated (75 mm in length, 12 mm in diameter at the thickest section, and 7 mm a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Dental materials journal

دوره 8 2  شماره 

صفحات  -

تاریخ انتشار 1989