Usefulness of orthodontic adhesive-containing fluorescent dye.

نویسندگان

  • Yasuhiro Namura
  • Takashi Tsuruoka
  • Chiyako Ryu
  • Masahiro Kaketani
  • Noriyoshi Shimizu
چکیده

Orthodontic adhesive is often left on the tooth surface when a multibracket appliance is debonded, and it is difficult to remove because its colour is similar to that of the tooth. If the adhesive changed colour during debonding, residual adhesive could be more easily removed. This in vitro study evaluated the usefulness of adhesive mixed with a small amount of fluorescent dye for clinical orthodontics. Sixty-four metal brackets were bonded to flattened bovine enamel surfaces using adhesives with three concentrations (0.001, 0.002, and 0.003 per cent) of fluorescent dye, and the shear bond strength (SBS) and adhesive remnant index (ARI) scores for each adhesive were determined. Colour penetrating through the transparent bracket was measured using a colour analyser. SBS and fluorescence intensity were examined to determine the stability of the adhesives after they were subjected to a thermal cycle test (1000 cycles). For data that were normally distributed, one-way analysis of variance followed by the Student-Newman-Keuls test was used to identify significant differences among the groups. If the data were not normally distributed, the Kruskal-Wallis H-test followed by the Mann-Whitney U-test with Bonferroni correction was used. Differences in ARI were determined with the chi-square test. The SBS of the adhesive with 0.003 per cent fluorescent dye was significantly lower than that of the control (Transbond). In ARI tests, significantly more of the adhesive with 0.003 per cent dye was left on the tooth surface after 24 hours compared with the other adhesives. With regard to colour penetration, the adhesive with 0.003 per cent dye was five times more visible than to others. SBS and fluorescence intensity of the adhesives were not affected by thermal cycling. Therefore, an adhesive containing less than 0.002 per cent fluorescent dye provides both sufficient bond strength for orthodontic brackets and sufficient fluorescent colour for easy visualization without aesthetic impairment.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

بررسی آزمایشگاهی میزان ریزنشت براکت‌های ارتودنسی باند‌شده با کامپوزیت بیس متاکریلات و کامپوزیت بیس سایلوران

Background: One of the orthodontic treatment problems, which causes marginal gaps and microleakage between tooth and composite is microleakage of composite bonding of orthodontic brackets. The microleakage formation permitting the passage of bacteria and oral fluids, which may cause white spot lesions under the brackets surface area.This is a clinical problem during orthodontic treatment. Few s...

متن کامل

Studies on UV-Visible, Fluorescent Spectral Properties and Solvatochromic behavior of Naphthalimide Compound Containing Quaternary Ammonium

This paper presents the results of absorption spectra, fluorescence properties and the effect of solvents on UV-Vis spectra of dye quaternized 4-acetylamino-N-2-aminomethylpyridine-1,8-naphthalimide. The fluorescency of the dye was evaluated and its Stokes shift value was 6140 cm-1 in DMF. The solvatochromism behavior of the novel compound is investigated by studying its spectra in pure organic...

متن کامل

In vitro Effects of a Neutral Fluoride Agent on Shear Bond Strength and Microleakage of Orthodontic Brackets

Introduction: This study aimed to evaluate the effect of pretreatment with a neutral fluoride agent on shear bond strength (SBS) and microleakage of orthodontic brackets, and to investigate any significant relationship between SBS and microleakage. Methods: Forty intact premolars were selected and randomly divided into 2 groups. Group 1 served as the control, while group 2 underwent treatment w...

متن کامل

Bond strength of an amorphous calcium phosphate-containing orthodontic adhesive.

OBJECTIVE To determine whether an amorphous calcium phosphate (ACP)-containing adhesive has an acceptable level of shear bond strength to be used as an orthodontic adhesive. MATERIALS AND METHODS Sixty extracted premolars were randomly divided into three groups for orthodontic bonding. Group 1 used a composite resin adhesive (Transbond XT), group 2 was bonded with an ACP-containing adhesive (...

متن کامل

Antibacterial Activity and Bonding Ability of an Orthodontic Adhesive Containing the Antibacterial Monomer 2-Methacryloxylethyl Hexadecyl Methyl Ammonium Bromide

Irreversible white spot lesion (WSL) occurs in up to 50% of patients during orthodontic treatment. Therefore, orthodontic adhesives need to be able to inhibit or reduce bacterial growth in order to prevent or minimize WSL. This study evaluated the antibacterial effect and shear bond strength (SBS) of a resin-based orthodontic adhesive containing the antibacterial monomer 2-methacryloxylethyl he...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • European journal of orthodontics

دوره 32 6  شماره 

صفحات  -

تاریخ انتشار 2010