Numerical Simulation of Fluid-Structure Interaction on Wedge Slamming Impact Using Particle Method
نویسندگان
چکیده
Abstract—This paper presents a fully Lagrangian coupled Fluid-Structure Interaction (FSI) solver for simulations of fluid-structure interactions, which is based on the Moving Particle Semi-implicit (MPS) method to solve the governing equations corresponding to incompressible flows as well as elastic structures. The developed solver is verified by reproducing the high velocity impact loads of deformable thin wedges with three different materials such as mild steel, aluminium and tin during water entry. The present simulation results for aluminium are compared with analytical solution derived from the hydrodynamic Wagner model and linear Wan’s theory. And also, the impact pressure and strain on the water entry wedge with three different materials, such as mild steel, aluminium and tin, are simulated and the effects of hydro-elasticity are discussed.
منابع مشابه
Numerical Solution of the Symmetric Water Impact of a Wedge Considering Dynamic Equations of Motion
In this research, numerical simulation of a symmetric impact of a 2-D wedge, considering dynamic equations in two-phase flow is taken into account. The two-phase flow around the wedge is solved based on finite volume method and volume of fluid (VOF) scheme. The dynamic mesh model is used to simulate dynamic motion of the wedge, thereby the effects of different dynamic meshes in both structured ...
متن کاملNumerical Simulation of Impact of Low Velocity Projectiles With Water Surface
In this article, Finite Element Method (FEM) and Eulerian-Lagrangies Algorithm (ELA) formulation were used to numerically simulate the impact of several low-velocity projectiles with water surface. Material models which were used to express behavior of air and water included Null material model. For the projectiles, rigid material model were applied. Results were validated by analyzing the impa...
متن کاملStudying the Impact of Unstructured Mesh Adaptation on Free Surface Flow Simulations
Engineering offshore problems require a continuous progress in the simulation of systems coupling structures and fluids with interfaces. The needs concern complex interface motions and fluid-structure interaction with slamming. The proposed methodology combines, in a parallel message passing algorithm, a level set based interface tracking, a standard finite element projection method on unstruct...
متن کاملمدلسازی اجزای محدود برش ماده فولادی با جت آب دارای ذرات برنده
Numerical modeling of machining processes is of significance in the parametric analysis and optimization of their performance. In this paper, a finite element-based model of abrasive waterjet (AWJ) cutting of a ductile material is presented with the help of an explicit, nonlinear finite element method. In this model, both solid-solid interaction and fluid-structure interaction are considered. T...
متن کاملPresenting a Modified SPH Algorithm for Numerical Studies of Fluid-Structure Interaction Problems
A modified Smoothed Particle Hydrodynamics (SPH) method is proposed for fluid-structure interaction (FSI) problems especially, in cases which FSI is combined with solid-rigid contacts. In current work, the modification of the utilized SPH concerns on removing the artificial viscosities and the artificial stresses (which such terms are commonly used to eliminate the effects of tensile and numeri...
متن کامل