The Dynamic Behaviour of the Instrumented Charpy Test
نویسندگان
چکیده
The dynamic characteristics of the Charpy test have been studied by means OF a Hopkinson bar apparatus and photoelasticity. It is Found that this technique permits a clear evaluation of the test results, and is preferable to the standard instrumented pendulum test.
منابع مشابه
Experimental Assessment of the Equivalent Strain Rate for an Instrumented Charpy Test
Instrumented Charpy test data can be used to obtain estimates of dynamic yield strength, by means of a well-established relationship published by W. Server in 1978. A fundamental issue in comparing measured dynamic tensile properties and Charpy-based estimations is establishing the equivalent uniaxial strain rate for an instrumented Charpy test, typically conducted at ≈ 5.5 m/s. In this investi...
متن کاملCorrelation of Energy, Deformation and Fractographic Parameters of Microalloyed Steel Welded Joint Fracture
Toughness is a complex material characteristic that is viewed from multiple aspects and is influenced by numerous factors. It is very important to have ability to assess toughness, i.e. to determine ductile or brittle material behaviour at any specific time. Beside total impact energy obtained at Charpy instrumented pendulum, the use of additional parameters such as lateral extension measuremen...
متن کاملPreliminary results on dynamic analysis of a new test rig for wheel-rail contact studies
A new reduced–scale test rig is developed owing to significantly contribute to the applicability of the laboratory tests on rolling contact fatigue (RCF) in wheel-rail material. This paper introduces the dynamic analysis of the test rig, in order to assess the vibration behaviour of the system with respect to contact phenomenon. Finite element modelling (FEM) is used to simulate the mecha...
متن کاملPreliminary results on multi-body dynamic simulation of a new test rig for wheel-rail contact
The ability to perform rolling contact fatigue (RCF) experiments in wheel–rail material is provided by a new small–scale test rig, manifesting the actual dynamic behaviour of the railway system. In this paper, a multi-body dynamics (MBD) model is proposed, simulating the vibration behaviour of the prescribed rig. The new testing facility is modelled using a three-dimensional model of the vehicl...
متن کاملImpact Properties of A356-T6 Alloys
The Charpy impact energy of A356 alloys has been measured. Instrumented Charpy impact tests have been conducted at 25, 100, 150, and 200 ~ The Charpy specimens were machined from plate castings or tapered cylindrical castings. The plates were produced in sand molds, and tapered cylinders were produced in water-cooled copper molds. Both unmodified and strontium-modified castings were tested. The...
متن کامل