Real-Time View-Interpolation System for Super Multi-View 3D Display

A 3D display using super high-density multiview images should enable reproduction of natural stereoscopic views. In the super multi-view display system, viewpoints are sampled at an interval narrower than the diameter of the pupil of a person’s eye. With the parallax produced by a single eye, this system can pull out the accommodation of an eye to an object image. We are now working on a real-time view-interpolation system for the super multi-view 3D display. A multi-view camera using convergence capturing to prevent resolution degradation captures multi-view images of an object. Most of the data processing is used for view interpolation and rectification. View interpolation is done using a high-speed image-processing board with digital-signal-processor (DSP) chips or single instruction stream and multiple data streams (SIMD) parallel processor chips. Adaptive filtering of the epipolar plane images (EPIs) is used for the view-interpolation algorithm. The multi-view images are adaptively interpolated using the most suitable filters for the EPIs. Rectification, a preprocess, converts the multi-view images in convergence capturing into the ones in parallel capturing. The use of rectified multi-view images improves the processing speed by limiting the interpolation processing in EPI. key words: super multi-view, view interpolation, multi-view camera, adaptive filtering, rectification