Hollow conic beam generator using a cylindrical rod and its performances
نویسندگان
چکیده
H. J. Kong Jin Choi J. S. Shin S. W. Yi B. G. Jeon Korea Advanced Institute of Science and Technology Department of Physics Daejeon 305-701, Korea E-mail: [email protected] Abstract. By numerical simulations, it has been shown that a conventional cylindrical rod can be used as a hollow conic beam generator by illuminating a parallel laser beam inclined to the axis of the rod. Half of the conic beam is formed by the reflection at the surface of the cylindrical rod, and the opposite side of the conic beam by its transmission. We discuss the parameters to determine the size of the conic beam and the effect of the dielectric multilayer coating on the intensity distribution of the conic beam. The line beams of the shapes such as circle, ellipse, parabola, or hyperbola can be generated by this hollow conic beam generator, depending on the position and orientation of the observing plane. © 2006 Society of Photo-Optical Instrumentation Engineers. DOI: 10.1117/1.2335851
منابع مشابه
Optimization study for BNCT facility based on a DT neutron generator
Background: A Boron Neutron Capture Therapy (BNCT) facility, based on a DT neutron generator, with the final goal to find out a potential, alternative, solution to existing BNCT treatment facilities which are based on nuclear reactors is examined. Materials and Methods: With the aim of the MCNP4B Monte Carlo code different beam-shaping assembly (BSA) configurations were considered. Lead was sel...
متن کاملیافتن آسیبدیدگی در تیر و میله بهروش انتشار موج با استفاده از المانهای محدود طیفی
In this paper, wave propagation method was applied to detect damage of structures. Spectral Finite Element Method (SFEM) was used to analyze wave propagation in structures. Two types of structures i.e. rod and Euler-Bernoulli beam were modelled using spectral elements. The advantage of spectral finite element over conventional Finite Element Method (FEM), in wave propagation problems, is its...
متن کاملResidual Stresses Measurement in Hollow Samples Using Contour Method
Residual stresses are created usually undesirably during manufacturing processes, including casting, welding, metal forming, etc. Residual stresses alone or in combination with other factors can cause the destruction and fracture of components or significant decline in their service life. Therefore, it is crucial to measure the residual stresses. Contour method is a destructive testing method c...
متن کاملA Survey lifting the cylindrical things and comparing them with the NIOSH lifting index
Background and Objectives: This study focused on lifting drill rods. Drilling is a repetitive and heavy mining operation with a high incidence and severity of musculoskeletal injuries. The purpose of this study was to examine how to lift a vertical drill bit (1.61m and 35kg in height) using two types of rod height and four feet positions, and finally compare them with the Lifting Index (LI). M...
متن کاملOptimised BNCT facility based on a compact D-D neutron generator
Background: Boron Neutron Capture Therapy (BNCT) is a very promising treatment for patients suffering gliobastoma multiforme, an aggressive type of brain cancer, where conventional radiation therapies fail. Thermal neutrons are suitable for the direct treatment of cancers which are located at near-tissue-surface deep-seated tumors need harder, epithermal neutron energy spectra. Materials and Me...
متن کامل