Rolling-induced Face Centered Cubic Titanium in Hexagonal Close Packed Titanium at Room Temperature.
نویسندگان
چکیده
Combining transmission electron microscopes and density functional theory calculations, we report the nucleation and growth mechanisms of room temperature rolling induced face-centered cubic titanium (fcc-Ti) in polycrystalline hexagonal close packed titanium (hcp-Ti). Fcc-Ti and hcp-Ti take the orientation relation: 〈0001〉hcp||〈001〉fcc and , different from the conventional one. The nucleation of fcc-Ti is accomplished via pure-shuffle mechanism with a minimum stable thickness of three atomic layers, and the growth via shear-shuffle mechanisms through gliding two-layer disconnections or pure-shuffle mechanisms through gliding four-layer disconnections. Such phase transformation offers an additional plastic deformation mode comparable to twinning.
منابع مشابه
Texture development in friction stir welds
The shear textures that develop in friction stir welds are reviewed and discussed. In all the materials examined, including face centred cubic (fcc), body centred cubic (bcc) and hexagonal close-packed (hcp) materials, friction stir welding produces a predominant shear texture with the close-packed directions aligned with the shear direction (SD) and the close-packed plane normal perpendicular ...
متن کاملThe Structure of Intermediate Phases in Alloys of Titanium with Iron, Cobalt, and Nickel
The crystal structure of the intermediate phases in the binary systems of titanium with iron, cobalt, and nickel has been studied and the results compared with those previously published. The phases of the Ti2X type are face-centered cubic with % atoms per cell, and the TiX phases are body-centered cubic. TiFe, and Tic02 are hexagonal but not isomorphous. The nickel-rich phase has the compositi...
متن کاملA Study of Cold Rolling Titanium by Transmission Electron Microscopy
Cold rolling behaviours of a commercial pure titanium have been studied by means of transmission electron microscopy. The results indicates: (1) In cold rolled titanium, there are a number of tangled dislocations which have often been observed in cold worked face centered cubic metals. (2) In 16.7% cold rolled Ti, imperfect structures with a high concentration of tangled dislocations were obser...
متن کاملCooperative effect of silicon and other alloying elements on creep resistance of titanium alloys: insight from first-principles calculations
Creep resistance is one of the key properties of titanium (Ti) alloys for high temperature applications such as in aero engines and gas turbines. It has been widely recognized that moderate addition of Si, especially when added together with some other elements (X), e.g., Mo, significantly improves the creep resistance of Ti alloys. To provide some fundamental understandings on such a cooperati...
متن کاملThree-dimensional nanoscopy of colloidal crystals.
We demonstrate the direct three-dimensional imaging of densely packed colloidal nanostructures using stimulated emission depletion microscopy. A combination of two de-excitation patterns yields a resolution of 43 nm in the lateral and 125 nm in the axial direction and an effective focal volume that is by 126-fold smaller than that of a corresponding confocal microscope. The mapping of a model s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Scientific reports
دوره 6 شماره
صفحات -
تاریخ انتشار 2016