A Study on the Design of Coaxial Isolator with Filter Circuit
نویسندگان
چکیده
In this paper, the detailed design of the 1.8 GHz band Y-junction stripline circulator with the low pass filter circuit in the center conductor in order to higher attenuations below value of -30 dB at 3rd order harmonics is proposed and presented. The HFSS is used to simulate designed 1.8GHz band circulator to check the non-reciprocal characteristics at operating frequency range and the results are compared with the experiment data. From these measurement results, We confirm that the proposed Y-junction stripline circulator using center conductor with filter circuit is effective in achieving very high attenuations below of 30 dB at 3rd order harmonics.
منابع مشابه
Ultra-Widband Distributed Amplifier Using Loss Compensation Technique on Both Input and Output Circuit
In this paper, we analyze a distributed amplifier based on input/output attenuation compensation. The analysis is carried out for a HEMT transistor; and a constant-k section filter is used to calculate the amplifier’s characteristics such as attenuation factor, phase constant and gain. The proposed design approach enables us to examine the tradeoff among the variables, which include the type an...
متن کاملDesign and Simulation of a Clamped-Clamped Micromechanical Beam AM Frequency Mixer-Filter
In the last decade Micromechanical components for communication applications has been fabricated via IC-compatible MEMS technologies. In fact, its most important impact is not at the component level, but rather at the system level, by offering alternative transceiver architectures that reduce power consumption and enhance performance. In this paper a mixer-filter for AM frequency receiver with ...
متن کاملClass-AB Square-Root Domain Filters Based on the Floating
In this paper a new approach for design of class-AB current-mode square-root domain filters based on the electronically simulated translinear loop principle is presented. FG-MOS transistors that operate in strong inverted saturation region are employed for implementation of translinear loop circuit. The filter achieves immunity to body effect, low circuit complexity, large input dynamic ran...
متن کاملDesign and Fabrication of a Narrow-bandwidth Micromechanical Ring Filter using a Novel Process in UV-LIGA Technology
This paper presents the design and a new low-cost process for fabrication of a second-order micromechanical filter using UV-LIGA technology. The micromechanical filter consists of two identical bulk-mode ring resonators, mechanically coupled by a flexural-mode beam. A new lumped modeling approach is presented for the bulk-mode ring resonators and filter. The validity of the analytical derivatio...
متن کاملA Compact Wide Bandpass Filter based on Substrate Integrated Waveguide (SIW) Structure
In this pare, a wideband three-order bandpass filter (BPF) is proposed. The proposed wideband filter is designed using the substrate integrated waveguide (SIW) structure by loading T-shape slots. A BPF with two resonators is formed by etching T-shape slots with different size on the top metal plane of the SIW structure. The filter is investigated with the theory of coupled resonator circuits. T...
متن کامل