Design of Accurate α-β Tracker based on Steady-State Performance Index
نویسنده
چکیده
Citation: Saho K (2016) Design of Accurate α-β Tracker based on Steady-State Performance Index. Int J Signal Process Anal 1:001 Copyright: © 2016 Saho K. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. *Corresponding author: Kenshi Saho, Assistant Professor, Department of Electronic and Computer Engineering, Ritsumeikan University, 1-1-1 Noji-Higashi, Kusatsu, Shiga, 525-8577, Japan, E-mail: [email protected] Design of Accurate α-β Tracker based on Steady-State Performance Index
منابع مشابه
Maximum Power Point Tracker for Photovoltaic Systems Based on Moth-Flame Optimization Considering Partial Shading Conditions
The performance of photovoltaic (PV) systems is highly dependent on environmental conditions. Due to probable changes in environmental conditions, the real-time control of PV systems is essential for exploiting their maximum possible power. This paper proposes a new method to track the maximum power point of PV systems using the moth-flame optimization algorithm. In this method, the PV DC-DC co...
متن کاملOptimal Steady-State Range Prediction Filter for Tracking with LFM Waveforms
This communication proposes a gain design method of an α-β filter with linear frequencymodulated (LFM) waveforms to achieve optimal range prediction (tracking) of maneuvering targets in steady-state. First, a steady-state root-mean-square (RMS) prediction error, called an RMS-index, is analytically derived for a constant-acceleration target. Next, a design method of the optimal gains that minim...
متن کاملFundamental Properties and Optimal Gains of a Steady-State Velocity Measured α-β Tracking Filter
This paper clarifies the steady-state properties and performance of an α-β filter for moving target tracking using both position and velocity measurements. We call this filter velocity measured α-β (VM-α-β) filter. We first derive the stability condition and steady-state predicted errors as fundamental properties of the VM-α-β filter. The optimal gains for representative motion models are then ...
متن کاملSteady-State Performance Characteristics of Photovoltaic System Coupled with a Centrifugal Water Pump
In this article our objective is to obtain steady state characteristics of shunt, series, and separately excited DC motors coupled with a centrifugal water pump supplied through a step-up, step-down, and cuk converter from photovoltaic generator. We assume that there are no storage batteries and, of course, the system must operate on maximum utilization i.e. maximum water must be pumped. It is ...
متن کاملPerformance Analysis and Design Strategy for a Second-Order, Fixed-Gain, Position-Velocity-Measured (—) Tracking Filter
We present a strategy for designing an α-β-η-θ filter, a fixed-gain moving-object tracking filter using position and velocity measurements. First, performance indices and stability conditions for the filter are analytically derived. Then, an optimal gain design strategy using these results is proposed and its relationship to the position-velocity-measured (PVM) Kalman filter is shown. Numerical...
متن کامل