Fabrication of Integrated Optical Mode Field Adapters at the End of Single/Multimode Fibers Using Fiber Splicing Machine
نویسندگان
چکیده
In this paper we present the fabrication of optical mode field adaptors for fiber optical communications using fiber splicing machine in special newly developed modus. We developed mode field transformers with radii from 5 m to 80 m the end of standard singlemode and multimode glass fibers, characterized by far field and near field methods. Easy and reliable fabrication of the radii with low standard deviation = 0.16-0.97 m or better than 3,2% relative to the mean radius has been achieved.
منابع مشابه
Integration of micro-optical elements with top-end of fibers via focused ion beam direct fabrication [5636-21]
Integration of micro-optical elements (MOEs) with optical fiber at top-end was realized by use of focused ion beam (FIB) direct milling. The designed MOEs (micro-refractive lens, microdiffractive lens with continuous relief, and micro-gratings) were directly milled by the FIB with ion energy and ion beam current of 40 keV and 569 pA, respectively, in the core area of both single mode fiber and ...
متن کاملLow-loss coupling between two single-mode optical fibers with different mode-field diameters using a graded-index multimode optical fiber.
We present a method for ultra-low-loss coupling between two single-mode optical fibers with different mode-field diameters using multimode interference in a graded-index multimode optical fiber. We perform a detailed analysis of the interference effects and show that the graded-index fiber can also be used as a beam expander or condenser. The results are important for devices in which optical f...
متن کاملLong distance transmission in few-mode fibers.
Using multimode fibers for long-haul transmission is proposed and demonstrated experimentally. In particular few-mode fibers (FMFs) are demonstrated as a good compromise since they are sufficiently resistant to mode coupling compared to standard multimode fibers but they still can have large core diameters compared to single-mode fibers. As a result these fibers can have significantly less nonl...
متن کاملA Sensitivity-Enhanced Refractive Index Sensor Using a Single-Mode Thin-Core Fiber Incorporating an Abrupt Taper
A sensitivity-enhanced fiber-optic refractive index (RI) sensor based on a tapered single-mode thin-core diameter fiber is proposed and experimentally demonstrated. The sensor head is formed by splicing a section of tapered thin-core diameter fiber (TCF) between two sections of single-mode fibers (SMFs). The cladding modes are excited at the first SMF-TCF interface, and then interfere with the ...
متن کاملFabrication of polymer-SiO2 nanocomposite optical fibers with a new method
At first step polymer optical fibers (POFs) are used in short distance for optical data transmissions. At second step SiO2 nanoparticles were prepared by sonochemical-assisted method. Silica nanoparticles were added to polymer matrix to prepare polymer based nanocomposites. Most of the POF applications are in the medical and electrical devices. There are several methods for fabrication of POFs,...
متن کامل