Design of a fully-static differential low-power CMOS flip-flop
نویسندگان
چکیده
A fully-static flip-flop structure is proposed and compared to both the conventional CMOS flip-flop and the Cascode Voltage Switch Logic (CVSL) static flip-flop proposed by Yuan and Svensson [I], in terms of speed, power consumption and silicon area. Then an add-and-delay circuit is implemented using all three flip-flop structures to demonstrate the performance of the proposed flip-flop. The add-anddelay structure is chosen since it is a widely used block in digital signal processing. The proposed structure showed to be consuming less power and occupying smaller silicon area. It has the additional advantage of being easier to merge with passtransistor logic structures.
منابع مشابه
Differential Static Ultra Low-Voltage CMOS Flip-Flop for High Speed Applications
Abstract: In this paper we present a simple ultra low-voltage and high speed D flip-flop. The delay of the static differential flip-flop presented is less than 12% compared to conventional differential CMOS flip-flops. The presented circuits have been simulated using Hspice and are valid for 90nm TSMC CMOS process. The proposed high-speed and ultra low-voltage flip-flop can be used for any digi...
متن کاملEfficient Timing Element Design Featuring Low Power Vlsi Applications
In this paper, we propose a novel Low-Power Dual dynamic node and edge triggered (DDNET) flip flop for Featuring Efficient low power applications. Several art of design techniques have been proposed to eliminate large capacitance in the precharge node of the conventional flip-flop, which drives separately by output pull-up, and pull down transistors. Though the pioneer designs which consumes mu...
متن کاملUltra Low-voltage Differential Static D Flip-Flop for High Speed Digital Applications
In this paper we present an ultra low-voltage and high speed D flip-flop. The flip-flop has an increased current level compared to standard CMOS circuits operating at low supply voltages. The increased current level is obtained by using a synchronized capacitive coupling to a semi floating-gate. The delay of the static differential flip-flop presented is less than 12% compared to conventional d...
متن کاملA new low power high reliability flip-flop robust against process variations
Low scaling technology makes a significant reduction in dimension and supply voltage, and lead to new challenges about power consumption such as increasing nodes sensitivity over radiation-induced soft errors in VLSI circuits. In this area, different design methods have been proposed to low power flip-flops and various research studies have been done to reach a suitable hardened flip-flops. In ...
متن کاملDesign of an Ultra Low Power Clock Gating D Flip-Flop Using Quasi-Static Energy Recovery Logic
This paper presents low power clock gating adiabatic D flip-flop using single phase sinusoidal power clock scheme. We propose the clock gated single phase Quasi-Static Energy Recovery Logic (QSERL) D flip-flop at 90nm CMOS technology. In the previously proposed QSERL logic, two phase sinusoidal power clocks were used that increased the hardware complexity and clocking issues. In this paper, sin...
متن کامل