GMAW Welding Optimization Using Genetic Algorithms
نویسندگان
چکیده
/ Vol. XXVI, No. 1, January-March 2004 ABCM 28 D. S. Correia, C. V. Gonçalves, Sebastião S. C. Junior and V. A. Ferraresi Federal University of Uberlândia Faculty of Mechanical Engineering Av. João Naves de Ávila, 2.121 38400-902 Uberlândia, MG. Brazil [email protected] [email protected] [email protected] [email protected] GMAW Welding Optimization Using Genetic Algorithms
منابع مشابه
A New Approach for Predicting and Optimizing Weld Bead Geometry in GMAW
Gas Metal Arc Welding (GMAW) processes is an important joining process widely used in metal fabrication industries. This paper addresses modeling and optimization of this technique using a set of experimental data and regression analysis. The set of experimental data has been used to assess the influence of GMAW process parameters in weld bead geometry. The process variables considered here inc...
متن کاملPrediction and Optimization of Mechanical Properties of St52 in Gas Metal Arc Weld Using Response Surface Methodology and ANOVA
Many researchers have developed algorithms to predict welding parameters. The variety of welding types is broad because the confine mixture of pressure and temperature could be selected. This paper introduces a response surface methodology (RSM) for optimization and prediction of the influence of Ar and CO2 gases and electrical current on tensile strength of St52’s gas metal arc weld (GMAW) lin...
متن کاملSensoring Fusion Data from the Optic and Acoustic Emissions of Electric Arcs in the GMAW-S Process for Welding Quality Assessment
The present study shows the relationship between welding quality and optical-acoustic emissions from electric arcs, during welding runs, in the GMAW-S process. Bead on plate welding tests was carried out with pre-set parameters chosen from manufacturing standards. During the welding runs interferences were induced on the welding path using paint, grease or gas faults. In each welding run arc vo...
متن کاملAn Evaluation of Welding Processes to Reduce Hexavalent Chromium Exposures and Reduce Costs by Using Better Welding Techniques
A group of stainless steel arc welding processes was compared for emission rates of fume and hexavalent chromium, and costs per meter length of weld. The objective was to identify those with minimal emissions and also compare relative labor and consumables costs. The selection included flux-cored arc welding (FCAW), shielded-metal arc welding (SMAW), and multiple gas metal arc welding (GMAW) pr...
متن کاملRecent Developments in High Productivity Pipeline Welding
Installation of new pipelines is predicted to grow at a rapid rate over the next twenty years, due in part to the increase use worldwide of combined cycle power generation plant using natural gas a fuel. The need to construct large diameter pipelines over long distances has led to an increased demand to improve the productivity of pipeline girth welding. Many novel techniques have been tried in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004