Stable Solar-Driven Water Oxidation to O2(g) By Multifunctional Electrocatalysts Coated Small Band Gap Semiconductors

نویسنده

  • Ke Sun
چکیده

Technologically important small band gap (<2 eV) semiconductors must be stabilized against corrosion or passivation in aqueous electrolytes before they can be used as photoelectrodes that directly produce fuels from sunlight. In addition, incorporation of electrocatalysts on the surface of the photoelectrodes is required for efficient oxidation of H2O to O2(g) and reduction of H2O or H2O and CO2 to fuels. Stabilization of technologically important semiconductors against photocorrosion and photopassivation would have a significant impact on photoelectrochemical energy conversion, and could enable the development of a new generation of robust integrated devices for efficient solar-driven water splitting and solar-driven CO2 reduction. Previous efforts have been extensively dedicated on elongating the lifetime of semiconductors under harsh fuel forming reaction conditions especially during the water oxidation half reaction. To date, the energy conversion performances and stability were limited on these systems, obscuring the realization of integrated solar fuel devices. In this work, we presented our recent effort on preparation of a multifunctional coating using Ni oxide, which provides multiple important functions on semiconductor photoelectrodes surfaces, including chemical/corrosion protection, electrically conducting, optical transparent/antireflective, and inherent electrocatalytic activity. The combination of the extraordinary film properties has resulted benchmark performances and stability on Si photoanodes, as well as other group II-VI and group III-V semiconductors that have never been able to be protected in relevant water oxidation conditions before. Results presented here indicated a viable strategy that is a promising approach to achieve the long-term stability of semiconducting photoanodes for use in solar fuel applications. © 2015 ECS The Electrochemical Society a a Stable Solar-Driven Water Oxidation to O2(g) By Multifunctional Electr... http://ma.ecsdl.org/content/MA2015-01/37/2019.abstract 1 of 2 9/21/2015 8:51 AM

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Stable Solar-Driven Water Oxidation to O2(g) by Ni-Oxide-Coated Silicon Photoanodes.

Semiconductors with small band gaps (<2 eV) must be stabilized against corrosion or passivation in aqueous electrolytes before such materials can be used as photoelectrodes to directly produce fuels from sunlight. In addition, incorporation of electrocatalysts on the surface of photoelectrodes is required for efficient oxidation of H2O to O2(g) and reduction of H2O or H2O and CO2 to fuels. We r...

متن کامل

Amorphous TiO₂ coatings stabilize Si, GaAs, and GaP photoanodes for efficient water oxidation.

Although semiconductors such as silicon (Si), gallium arsenide (GaAs), and gallium phosphide (GaP) have band gaps that make them efficient photoanodes for solar fuel production, these materials are unstable in aqueous media. We show that TiO2 coatings (4 to 143 nanometers thick) grown by atomic layer deposition prevent corrosion, have electronic defects that promote hole conduction, and are suf...

متن کامل

Stable solar-driven oxidation of water by semiconducting photoanodes protected by transparent catalytic nickel oxide films.

Reactively sputtered nickel oxide (NiOx) films provide transparent, antireflective, electrically conductive, chemically stable coatings that also are highly active electrocatalysts for the oxidation of water to O2(g). These NiOx coatings provide protective layers on a variety of technologically important semiconducting photoanodes, including textured crystalline Si passivated by amorphous silic...

متن کامل

Synthesis of Ta3N5 Nanotube Arrays Modified with Electrocatalysts for Photoelectrochemical Water Oxidation

Tantalum nitride (Ta3N5) is a promising material for photoelectrochemical (PEC) water oxidation with a narrow band gap (2.1 eV) that can effectively utilize visible light in the solar spectrum. Ta3N5 nanotube (NT) arrays were synthesized on a Ta foil by electrochemical anodization followed by an ammonia treatment at 800 °C. The photocurrent of nanostructured Ta3N5 was over 3 times higher than t...

متن کامل

GaP/GaNP Heterojunctions for Efficient Solar-Driven Water Oxidation.

The growth and characterization of an n-GaP/i-GaNP/p+ -GaP thin film heterojunction synthesized using a gas-source molecular beam epitaxy (MBE) method, and its application for efficient solar-driven water oxidation is reported. The TiO2 /Ni passivated n-GaP/i-GaNP/p+ -GaP thin film heterojunction provides much higher photoanodic performance in 1 m KOH solution than the TiO2 /Ni-coated n-GaP sub...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015