A Survey on Parallel Logic Simulation
نویسنده
چکیده
Simulation of logic designs is a very important part of the VLSI-design process. The increasing size of the designs requires more e cient simulation strategies to accelerate the simulation process. Parallel logic simulation seems to be a promising approach in this direction. This paper describes the basic principles of parallel logic simulation, discusses di erent approaches, and surveys the research done in this eld so far.
منابع مشابه
Autonomous Parallel Parking of a Car Based on Parking Space Detection and Fuzzy Controller
This paper develops an automatic parking algorithm based on a fuzzy logic controller with the vehicle pose for the input and the steering angle for the output. In this way some feasible reference trajectory path have been introduced according to geometric and kinematic constraints and nonholonomic constraints to simulate motion path of car. Also a novel method is used for parking space detec...
متن کاملA New Intelligent Controller for Parallel DC/DC Converters
In this paper, the immune controller, is used to control the paralleled DC-DC converters. A PID controller is first applied and its coefficient is optimized using an intelligent (PSO) algorithm. Immune controller is then added to PID controller and an immune PID controller is formed. Two methods have been suggested to determine non-linear behavior of immune controller. In the first method, an e...
متن کاملExplaining the Level of Human Thought in the Parallel Civilizations Based on Formal Structure and Visual Imagination Formed in Mythical Narratives
Myth, like any other form of narrative, has an undeniable role in visual imagination based on the foundations of mythical thought. Ernst Cassirer, by recovering the fundamental principles of mythical thought, brings against them to the foundations of contemporary rational thought and defines the fundamental features of mythical thought as compared to modern rational thought. He also believes t...
متن کاملSIMULATION AND MONITORING OF THE MACHINING PROCESS VIA FUZZY LOGIC AND CUTTING FORCES
On time replacement of a cutting tool with a new one is an important task in Flexible Manufacturing Systems (FMS). A fuzzy logic-based approach was used in the present study to predict and simulate the tool wear progress in turning operation. Cutting parameters and cutting forces were considered as the input and the wear rate was regarded as the output data in the fuzzy logic for construct...
متن کاملDesign and Synthesis of High Speed Low Power Signed Digit Adders
Signed digit (SD) number systems provide the possibility of constant-time addition, where inter-digit carry propagation is eliminated. Such carry-free addition is primarily a three-step process; adding the equally weighted SDs to form the primary sum digits, decomposing the latter to interim sum digits and transfer digits, which commonly belong to {–1, 0, 1}, and finally adding the tra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1993