Proposal Interfacing a PUMA 500 Robot with a PC - based Controller
نویسندگان
چکیده
منابع مشابه
A New Approach to Implementation of an Open Architecture Controller for a PUMA Robot
The paper describes the replacement of the controller for a PUMA 512 robot with a newly designed PC based controller employing real-time direct control of the six joints. The original structure of the PUMA robot has been retained. The hardware of the new controller includes in-house designed: PWM amplifiers, digital and analog controllers. The system uses digital I/O cards; signal conditioner c...
متن کاملQRobot – A Multitasking PC Based Robot Control System
In this paper, we describe QRobot, a low level real-time PC-based system for controlling PUMA robot manipulators. Specifically, we illustrate how a standard PUMA controller can be retrofitted with interface boards that allow it to be connected to an industry standard PC. All computational units are removed from the existing PUMA controller, and the PC assumes the role of computing the control s...
متن کاملAn Open Source Distributed Platform for the Control of the PUMA 560 Manipulator
In this paper, an RTAI-Linux based distributed platform for the control of the PUMA 560 robotic manipulator is presented. From the mechanical point of view, the PUMA 560, besides being one of the first and most popular 6-DOF anthropomorphic manipulator, is still a very good example of implementation of small size robotic arms. On the other hand, its original control system, if compared to moder...
متن کاملA PC-based Workstation for Robotic Discectomy
This paper describes a PC-based controller for robot-assisted minimally invasive surgery. The development is motivated by the need of reducing the exposure of operating room personnel to X-rays during surgical procedures such as percu-taneous discectomy. The approach taken consists of upgrading the hardware architecture and the control software of a clean-room PUMA 260 manipulator, and by devel...
متن کاملOptimization of PID Controller with Supervisory Fuzzy Control for Industrial Robots
It is difficult to control the movement of the robot arm due to its nonlinear structure. PID controller is still in the world because of its simplicity in designing this controller as the main controller. The nonlinear control technique is very complicated, and this is not very interesting in the controller. While fuzzy control has a better performance, it incorporates a fuzzy control with ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009