Investigations on the Combustion of Various Waste Fractions inside a Grate Furnace
نویسندگان
چکیده
The influence of various waste mixtures on the combustion process in a grate furnace was investigated at the test plant TAMARA. Measurements were carried out inside the combustion chamber by monitoring temperatures and sampling gaseous combustion products and heavy metals. The data were verified by element and energy bal ances. The different fuel fractions influence the combustion process by producing a faster carbon burnout when proc essing fuels having increased heating values. Above the fuel bed the concentration of products of incomplete . combustion like CO and total organic compounds increase with increasing heating values, too. The specification and the partitioning of the mayor C-H compounds inside the combustion chamber are not influenced significantly by the different fuels. The release of heavy metals from the fuel bed to the flue gas takes place only in the region of the highest tem peratures.
منابع مشابه
Reversed Combustion of Waste in a Grate Furnace – an Experimental Study
Most widely used concept for municipal solid waste (MSW) incineration is combustion on a moving grate with energy recovery. In MSW incinerators fresh waste stacked on a grate enters the combustion chamber, heats up by radiation from the flame above the layer and ignition occurs. Ignition front propagates downwards producing heat for drying and devolatilisation of the fresh waste below until it ...
متن کاملCFD Modeling of Grate Furnace Designs for Municipal Solid Waste Combustion
The average amount of municipal solid waste (MSW) generated in Malaysia is 0.5–0.8 kg/person/day and has increased to 1.7 kg/person/day in major cities. As rapid development continues, so does the amount of MSW and thus a lack of space for new landfills. Thus a better way of disposing MSW would be to incinerate. The basic design requirements of high-performance incinerators are the 3Ts (time, t...
متن کاملIntegrated municipal solid waste treatment using a grate furnace incinerator: the Indaver case.
An integrated installation for treatment of municipal solid waste and comparable waste from industrial origin is described. It consists of three grate furnace lines with flue gas treatment by half-wet scrubbing followed by wet scrubbing, and an installation for wet treatment of bottom ash. It is demonstrated that this integrated installation combines high recovery of energy (40.8% net) with hig...
متن کاملCombined simulation of combustion and gas flow in a grate-type incinerator.
Computational fluid dynamic (CFD) analysis of the thermal flow in the combustion chamber of a solid waste incinerator provides crucial insight into the incinerator's performance. However, the interrelation of the gas flow with the burning waste has not been adequately treated in many CFD models. A strategy for a combined simulation of the waste combustion and the gas flow in the furnace is intr...
متن کاملComputer simulation of waste combustion in a moving grate furnace as a tool for process optimization and operator training
G. Brem and L.B.M. van Kessel TNO-MEP P.O.Box 342 7300 AH Apeldoom
متن کامل